DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (SONEPAT)
SCHEME OF STUDIES & EXAMINATION FOR
MASTER OF TECHNOLOGY IN
ELECTRONICS & COMMUNICATION ENGINEERING
(Credit Based Scheme w.e.f 2008-09)
SEMESTER I
Sr.N
o
Course No. Course Title Teaching
Schedule
Marks of
Class Work
Exam. Marks Total
Marks
Credit Durati
on of
L P Theory Practical Exam.
1 MEEC-501 Advanced Microprocessor &
Micro Controllers
4 - 50 100 - 150 4 3
2 MEEC-503 Satellite & Space
communication
4 - 50 100 - 150 4 3
3 MEEC-505 Information & Communication
Theory
4 - 50 100 - 150 4 3
4 MEEC-507 Advanced Digital Signal
Processing
4 - 50 100 - 150 4 3
5 Elective-1 4 - 50 100 - 150 4 3
6 MEEC-517 Satellite Lab - 3 50 50 100 3 3
7 MEEC-519 Advanced Microprocessor &
Micro Controllers Lab
- 3 50 50 100 3 3
Total 20 6 350 500 100 950 26
ELECTIVE –1
Advanced Digital Communication Techniques (MEEC-509)
Advance Mathematics for Engineers (MEEC-511)
Computational methods (MEEC-513)
Data Communication Networks (MEEC-515)
NOTES:
1. The choice of students for any elective shall not be binding on the Dept. to offer it.
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (SONEPAT)
SCHEME OF STUDIES & EXAMINATION FOR
MASTER OF TECHNOLOGY IN
ELECTRONICS & COMMUNICATION ENGINEERING
(Credit Based Scheme w.e.f 2008-09)
SEMESTER II
Sr.
No
Course No. Course Title Teaching
Schedule Marks of
Class Work
Exam. Marks Total
Marks
Credit
Durati
on of
L P Theory Practical Exam.
1 MEEC-502 Electronics System Design 4 - 50 100 - 150 4 3
2 MEEC-504 Optical Communication 4 - 50 100 - 150 4 3
3 MEEC-506 VLSI Design 4 - 50 100 - 150 4 3
4 MEEC-508 Wireless Mobile
Communication
4 - 50 100 - 150 4 3
5 Elective-II 4 - 50 100 - 150 4 3
6 MEEC-518 VLSI Lab - 3 50 50 100 3 3
7 MEEC-520 Optical Communication lab - 3 50 50 100 3 3
Total 20 6 350 500 100 950 26
ELECTIVE –II
Reliability Engineering (MEEC-510)
Telecommunication Switching Systems (MEEC-512)
Multimedia System (MEEC-514)
Statistical Models (MEEC-516)
NOTES:
1. The choice of students for any elective shall not be binding on the Deptt. to offer it.
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (SONEPAT)
SCHEME OF STUDIES & EXAMINATION FOR
MASTER OF TECHNOLOGY IN
ELECTRONICS & COMMUNICATION ENGINEERING
(Credit Based Scheme w.e.f 2009-10)
SEMESTER III
Sr.
No
Course No. Course Title Teaching
Schedule Marks of
Class Work
Exam. Marks
Total
Marks
Credit
Durati
on of
L P Theory Practical Exam.
1 MEEC-601 Neural Networks & Fuzzy Logic 4 - 50 100 - 150 4 3
2 MEEC-603 CDMA System 4 - 50 100 - 150 4 3
3 Elective-III 4 - 50 100 - 150 4 3
4 MEEC-613 Seminar - 2 50 - - 50 2 -
5 MEEC-615 Project - 4 50 50 100 4 -
6 MEEC-617 Dissertation (Phase-I) - 4 100 - - 100 4 -
Total 12 10 350 300 50 700 22 -
ELECTIVE III
Emerging Network Technologies (MEEC-605)
Digital Signal Processors & Applications (MEEC-607)
Image Processing (MEEC-609)
Computer Communications (MEEC-611)
NOTE:
1. The choice of students for any elective shall not be binding on the Deptt. to offer it.
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (SONEPAT)
SCHEME OF STUDIES & EXAMINATION FOR
MASTER OF TECHNOLOGY IN
ELECTRONICS & COMMUNICATION ENGINEERING
(Credit Based Scheme w.e.f 2009-10)
SEMESTER IV
Sr.N
o
Course No. Course Title Teaching
Schedule Marks of
Class Work
Exam. Marks Total
Marks
Credit
L P Theory Practical
1 MEEC-602 Dissertation - 20 50 - 100 150 20
Total 20 50 - 100 150 20
NOTE:
1. The dissertation shall be evaluated through an exam. by a Committee of Examiners consisting of Head of the
Department, Dissertation supervisor & one External Examiner. The evaluation shall be based upon the above grades.
MEEC-501 ADVANCED MICROPROCESSOR & MICROCONTROLLERS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Design of basic microprocessor architectural Concepts :Microprocessor architecture, word Lengths, addressable memory,
Microprocessor's speed architectural characteristics, registers, instruction, memory addressing architecture, ALU, GPR's
Control logic & internal data bus.
UNIT 2:
Microprocessor Instructions & Communication: Instruction Set, Mnemonics, Basic Instruction Types, Addressing modes,
Microprocessor I/O connecting I/O put to Microprocessor, Polling and Interrupts, Interrupt and DM. Controllers.
UNIT 3:
Microcontroller: Introduction 8051 architecture and programming model. Internal RAM and registers, I/ O parts,
Interrupt system & Instruction sets.
UNIT 4:
Advanced microprocessors: Intel X86 family of advanced Microprocessor, programming model of 86 family, X86
addressing modes, instruction set, hardware. Motorola 68XXX family of microprocessor, 68XXX addressing modes,
instruction set, hardware.
UNIT 5:
Microprocessor I/ O: Data Communication, parallel I/ O serial communication, Serial interface and UART modems, I/O
devices, D/A, A/D interface, special I/O devices.
UNIT 6:
Developing Microprocessor Based Products: Introduction to the Design Process, Preparing the specifications, Developing
a design, Implementing and Testing and design, Regulatory Compliance Testing, design tool for Microprocessor
Development.
Text Books:
1. C.M. Gilmore, “Microprocessors Principals and Application”, MGH
2. Rajkamal, “Embedded System, Architecture & Programming”, TMH
Reference Books:
1. Berry B. Berry, “ Inter Series of microprocessors”, PHI
2. D. V. Hall, “ Microprocessor & Interfacing”, TMH
3. Peatman, “Microprocessor Based System Design”, Pearson
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-503 SATELLITE AND SPACE COMMUNICATION
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction: Satellite communication, Brief History.
UNIT 2:
Orbits of satellite: Low, medium and Geo synchronous main characteristics, Angle period, Returning period, Angle of
Evaluation, Propagation Delay, Orbital Spacing.
UNIT 3:
Satellite Links: Delay transponders, Earth Stations, Antennas and Earth coverage, Altitude and eclipses.
UNIT 4:
Earth space propagation effects: Frequency window, Free space loss, Atmospheric absorption, Rainfall Attenuation,
Ionospheric scintillation, Telemetry, Tracking and command of satellites.
UNIT 5:
Detection: QPSK offset QPSK and MSK. Coherent and non-coherent detection, Error rate performance.
UNIT 6:
Synchronization: Principle and techniques, Multiple Access Techniques, FDMA, SPADE system, TDMA system, concept
and configuration, system timing frames format, SSMA-Basu Principles, VSAT, Random access, space communication,
link design description of operational in TELSAT and INSA T system.
UNIT 7:
Satellite Services: Satellite Mobile Services, Radarsat, Global positioning satellite system, Position finding, frequency used
and GPS services.
UNIT 8:
Laser Satellite Communication: Link analysis, optical satellite link Tx. and Rx, Deep Space optical Comm. Link.
Text Books:
1. J. Martin: Communication Satellite System, PH Englewood.
2. D.C.Aggarwal: Satellite Communication, Khanna Publishers.
Reference Books:
1. Tri Ha Digital Satellite Communication Tata Mc Graw Hill.
2. Harry and Vam Trees: Satellite Communication, IEEE Proceedings, 1979.
3. Derris Roddy: Satellite Communications, Mcgraw H.U.
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-505 INFORMATION & COMMUNICATION THEORY
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
.
UNIT 1:
Information Theory: Concept of Information and Entropy, Shanon’s theorems, Channel Capacity Self information,
Discrete and Continuous entropy, Mutual and joint information, Redundancy.
UNIT 2:
Coding Theory: Source encoding & channel encoding, Error detection & Correction, Various codes for channel coding,
Rate Distortion functions.
UNIT 3:
Codes used in Information Theory: Algebra of finite fields, Linear block codes, systematic linear codes& optimum coding
for Binary symmetric channel, The Generator & parity check matrices, Syndrome decoding & Symmetric channels,
Hamming codes, Perfect codes, BCH codes , Reed Solomon codes, Justeen codes, MDS codes & generalized BCH codes,
Convolution codes & Viterbi decoding algorithm, Cyclic codes, Reed Muller Code, Hadamard Code.
UNIT 4:
Performance of codes: Performance of linear block codes & convolution codes, Bounds on code performance, Bounds on
error performance.
Text books:
1. Blahut R.E. , Theory and practice of error control codes, AWL1983.
2. Wilson, Digital Modulation and coding, Pearson.
Reference Books:
1. B.P. Lathi, Communication System, Oxford.
2. Ranjan Bose, Information Theory, Coding & Cryptography, TMH.
3. J. Dass. , S.K. Malik & P.K. Chatterjee, Principles of digitals communication.
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-507 ADVANCED DIGITAL SIGNAL PROCESSING
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction of DSP: Introduction to Signals, Systems, and Signal Processing, Discrete time Signals & Systems and their
Properties, Analysis of Discrete time systems.
UNIT 2:
Z-Transform, The system function of a digital filter, digital filter implementation from the system function, the inverse Ztransform,
properties and applications, Fourier Transform and its inverse, sampling and reconstruction of signals,
Sampling Rate Conversion, Discrete Fourier transform, properties of DFT, Circular Convolution, Fast Fourier Transform,
applications of FFT Algorithms, Chirp Z-Transform.
UNIT 3:
Digital Filter Structure & Implementation: Linearity, time- invariance & causality, the discrete convolution, the transfer
function, stability tests, steady state response, Amplitude & Phase characteristics, stabilization procedure, Ideal LP Filter,
Physical reliability & specifications.FIR Filters, Truncation windowing & Delays, design example, IIR Filters: Review of
design of analog filters & analog frequency transformation. Digital frequency transformation, Design of LP filters using
impulse invariance method, Bilinear transformation, Phase equalizer, digital all pass filters.
UNIT 4:
Implementation of Filters: Realization block diagrams, Cascade & parallel realization, effect of infinite-word length,
transfer function of degree 1&2, Sensitivity comparisons, effects of finite precision arithmetic on Digital filters.
UNIT 5:
Nonparametric and Parametric Power Spectrum Estimation, Applications of DSP to Speech and Radar.
Text Books:
1. Alam V. Oppenheim & Ronald W. Schafer, “Digital Signal Processing” PHI.
2. JG Proakis, “Digital Signal Processing”, (PHI) 3rd Edition.
Reference Books:
1. Rabiner & Gold, “Theory & application of digital Signal Processing”, PHI 1992.
2. Roman kuc, “Introduction to Digital Signal Processing,” McGraw hill Edition.
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-509 ADVANCED DIGITAL COMMUNICATION TECHNIQUES
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Vector quantization, sub band coding of speech, audio and video signals, linear predictive coding of speech, CELP coders,
and MPEG standards for audio and video.
UNIT 2:
Characterization of band pass signals and systems, ortho-normal expansion of signals, representation of digitally
modulated signals, non-linear modulation methods with memory. Optimum demodulation for known signals in additive
Gaussian noise.
UNIT 3:
Probability of error for binary and Mary signaling, DPSK demodulator, carrier and symbol synchronization techniques,
characterization of band limited channels and ISI, signal design for zero ISI, and controlled ISI, optimum demodulator
for ISI and AWGN.
UNIT 4:
Liner equalization and decision feedback, equalization, adoptive equalize, fading dispersion channels, and tapped delay
line mosel optimum demodulation for binary signals over fading disperse channels, RAKE recover.
UNIT 5:
Coding techniques: Convolution codes, Hamming distance measures for Convolution codes. Maximum likely hood
decoding of convolution codes, Viterbi decoding, Trellis codes.
UNIT 6:
Digital Communication through fading multipath channels: characterization of fading multipath channels, diversity
techniques for fading multipath channels, digital signal over a frequency selective, slowly fading channels.
Text Books:
1. Proakis, J.G, “Digital Communication”, Mc Graw hill 1995
2. Haykin, S., “Digital Communication”, Wiley.
Reference Books:
1. Bhattachary, “Digital Commnication Electrical & Electronic Series”, TMH
2. Couch, “Digital & Analog Commnication System”, Pearson
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-511 ADVANCED MATHEMATICS FOR ENGINEERS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Fourier Transforms: Introduction, Fourier Integral Theorem, Fourier Sine and Cosine Integral, Complex form of Fourier
Integrals, Fourier Transforms, Inverse Fourier Transform, Properties, Modulation Theorem, Convolution Theorem for
Fourier Transforms, Parseval’s Identity, Fourier Transforms of derivative of functions, Relation between Fourier and
Laplace transform.
UNIT 2:
Z –Transform: Introduction, Properties of Z- Transform, Evaluation of inverse Z – Transform.
UNIT 3:
Matrices And Linear System Of Equations: Solution of linear simultaneous equations by Gaussian elimination and its
modification, Crout’s triangularization method, Iterative methods-Jacobins method, Gauss-Seidal method, Determination
of Eigen values by iteration.
UNIT 4:
Conformal Mapping: Conformal mapping, linear transformations, Bi-linear transformations, Schwarz’s-Christoffel
transformations.
UNIT 5:
Calculus Of Variations: Euler-Lagrange’s differential equation, The Brachistochrone problems and other applications.
Isoperi-metric problem, Hamilton’s Principle and Lagrange’s Equation. Rayleigh-Ritz method, Galerkin method.
Text Book:
1. Dr. B.S. Grewal; “Higher Engineering Mathematics”, Khanna Publishers
2. Churchill, “Fourier Series and Boundary Values Problems”, McGraw Hill.
3. Galfand & Fomin, “Calculus of Variations”, Prentice Hall.
Reference Books:
1. Churchill, “Complex Variables & Applications”, McGraw Hill.
2. Elsgole, “Calculus of Variations”, Addison Wesley.
3. I.N. Sneddon.The Use of Integral Transforms”, Tata McGraw Hill.
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-513 COMPUTATIONAL METHODS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Computational complexity, Error analysis in science and engineering, Fourier series, Fourier Integral, example of
transforms' and orthogonal polynomials, Time series calculation of power spectra, convolution and correlation using
FETs, introduction to wavelets.
UNIT 2:
Evaluation of integrals, Elementary Analytical methods, Trapezoidal and Simpson’s rules, Summation of series, Gaussian
Quadrature and orthogonal polynomials, Multidimensional integrals.
UNIT 3:
Ordinary differential equations, solution in closed form, Power series methods, approximate methods, Predictor and
corrector methods, Numerical differentiation, and estimation of errors, extermination of functions, optimization and
simple search, simplex method of Nelder and Mend, Gradient based method, Finite elements method.
UNIT 4:
Vectors and. matrices, solution of .linear and algebraic equations by direct and interactive methods, Gaussian elimination,
minimal residual and conjugate gradient methods, pre-conditioning techniques.
Text Books:
1. Kreyszig F: Advanced Engineering Mathematics, John Wiley seventh ed 1993.
2. Dr. B.S. Grewal, “Numerical Methods in Engg. & science”, Khanna Publisher
Reference Books:
1. Gerald/ Wheatley: Applied Numerical Analysis, Pearson Education Asia, 2002.
2. S.S Sastry, “Introduction methods of Numerical analysis”,PHI
3. J.B. Scarborough, Numerical Mathematical Analysis, oxford
4. M.K. Jain, “Numerical Solution of differential Equations”, Wiley Eastern
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-515 DATA COMMUNICATION NETWORKS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction to Data Transmission: Overview of Data Communication and Networking, Analog and Digital Data
Transmission, Transmission Impairments, Various Transmission Media, Data Encoding.
UNIT 2:
Digital Data Communication Techniques: Asynchronous and Synchronous Transmission, Error Detection and correction
techniques, Physical interfaces.
UNIT 3:
Data Link Control: Link Configurations, Protocol principles (Error control, Flow control), Bit Oriented and character
oriented protocol, Data link layer services, Link Control.
UNIT 4:
Multiplexing: F.D.M. Synchronous TDM, Statistical TDM
UNIT 5:
Communication Networking Techniques: Communication Networks, Circuit Switching, Message Switching, Packet
Switching, Local Networking Technology, The bus / tree topology, the ring topology, Medium Access control protocols
(CSMA/CD, Token ring, Fibre Distributed Data Interface, Distributed Queue Dual Bus).
UNIT 6:
Computer Communication Architecture: OSI and TCP/ IP Model, Protocol and Architecture, Networking Access
protocols, Inter Networking, Transport layer Protocols, Session Service and Protocols, and Presentation/ Application
protocols.
UNIT 7:
ISDN Networks: Concepts & Architecture, Protocols.
Text Books:
1. William Stallings, “Data and Computer Communication”, PHI, 4th Ed.
2. Forouzan, “Data communications and networking”, TMH
Reference Books:
1. Andrew Tanenbaum, “Computer Networking”, PHI
2. Godbole, “Data communications and network”, TMH
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-517 SATELLITE LAB
L T P Credits Marks
- - 3 3 Exams: 50
Sessionals: 50
Total: 100
Duration of Exam: 3 hrs.
(A few experiments may be designed & included in this list depending upon the infrastructure available in the institute)
1. To Study the process of Transmitting Signal.
2. To Study the Base band Signal in a Satellite Link.
3. To estimate C/N Ratio.
4. To estimate S/N Ratio.
5. To setup digital satellite Communication Link.
6. To Study Black & White and Color T.V.
7. To plot radiation pattern of parabolic reflector.
8. To Study Satellite Communication Receiver.
9. To set up a PC to PC Sat. Com.Link using RS –232 port.
10. To measure the propagation delay of signal in a Sat.Com. Link.
11. To transmit & receive the function generator waveform through a Sat.Com. Link.
12. To set up a active & passive satellite communication link & study their difference.
NOTE:
The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner.
MEEC-519 ADVANCED MICROPROCESSOR & MICROCONTROLLER LAB
L T P Credits Marks
- - 3 3 Exams: 50
Sessionals: 50
Total: 100
Duration of Exam: 3 hrs.
(A few experiments may be designed & included in this list depending upon the infrastructure available in the institute)
1. To study the architecture of 8086 Kit
2. Write an ALP to convert a hexadecimal No. to decimal No. in single step execution (DEBUG)
3. Write an ALP to enter a word from keyboard and to display
4. Write an ALP for addition of two one digit Numbers.
5. Write an ALP to display a string
6. Write an ALP reverse a string
7. Write an ALP to check whether the No. is Palindrome
8. To study the Microcontroller Kit
9. Write an ALP to generate 10 KHz frequency square wave
10. Write an ALP to generate 10 KHz & 100KHz frequency using interrupt
11. Write an ALP to interface intelligent LCD display
12. Write an ALP to interface intelligent LED display
13. Write an ALP to Switch ON alarm when Microcontroller receive interrupt
14. Write an ALP to interface one microcontroller with other using serial / parallel communication.
NOTE: The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner.
MEEC-502 ELECTRONICS SYSTEM DESIGN
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Review of Digital Electronics concept
UNIT 2:
MSI and LSI Circuits And Their Applications: Arithmetic Circuits, Comparators, Multiplexers, Code Converters, XOR
And AND-OR INVERTER Gates, Wired Logic, Bus Oriented Structures, Tri-State Bus System, Propagation Delay.
UNIT 3:
Sequential Machines: The Concept Of Memory, The Binary Cell, The Cell And The Bouncing Switch, Set / Reset, D,
Clocked T, Clocked JK Flip Flop, Design Of Clock F/ F, Conversion, Clocking Aspects, Clock Skew, State Diagram
Synchronous Analysis Process, Design Steps For Traditional Synchronous Sequential Circuits, State Reduction, Design
Steps For Next State Decoders, Design Of Out Put Decoders, Counters, Shift Registers and Memory.
UNIT 4:
Multi Input System Controller Design: System Controllers, Design Phases And System Documentation, Defining The
System, Timing And Frequency Considerations, Functional, Position And Detailed Flow Diagram Development, MDS
Diagram, Generation, Synchronizing Two System And Choosing Controller, Architecture, State Assignment, Next State
Decoders And Its Maps, Output Decoders, Clock And Power Supply Requirements, MSI Decoders, Multiplexers In
System Controllers, Indirect Addressed Multiplexers Configurations, Programmable System Controllers, ROM, PLA And
PAL Based Design. Introduction to the CPLD & FPGA.
UNIT 5:
Asynchronous Finite State Machines: Scope, Asynchronous Analysis, Design Of Asynchronous Machines, Cycle And
Races, Plotting And Reading The Excitation Map, Hazards, Essential Hazards Map Entered Variable, MEV Approaches
To Asynchronous Design, Hazards In Circuit Developed By MEV Method.
Text Books:
1. Fletcher, “An Engineering Approach to Digital Design” PHI 1990
2. Z. Kohavi, “Switching and Finite Automata Theory”, TMH
Reference Books
1. Markovitz, “Introduction to Logic Design”, TMH
2. Mano, “ Digital Design”, PHI
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-504 OPTICAL COMMUNICATION
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction: Advantage of optical fiber communication, Elements of fiber communication link, Ray theory .and
electromagnetic mode theory for optical propagation, step index and graded index fibers, Numerical Aperture.
UNIT 2:
Optical fibers, Losses & Dispersion: Attenuation, Absorption, Linear and non-linear scattering losses, Dispersion, overall
fiber dispersion, polarization, fiber bending losses, multimode step index and graded index fibers, single mode fiber,
plastic clad and all- plastic fibers, optical fiber cables, dispersion shifted and dispersion flattered fibers, practical fiber
profiles.
UNIT 3:
Optical Sources: Basic concepts: LED for Optical Communication, Burrus type double hetro-structure, Surface emitting
LEDs, Shape geometry, Edge emitting LEDs, LED to fiber launch systems semiconductor Lasers Theory, modulation and
characteristics, Fabry-Perot lasers quantum well lasers and distributed feedback lasers.
UNIT 4:
Photo Detectors: P.I.N Photo Diodes: Theory and their characteristics, Avalanche photo diode detectors, Theory and their
band width noise in APD.
UNIT 5:
Optical fiber communication System: Optical transmitter circuit : LED and laser drive circuits, optical receiver circuit;
Structure, Pre amplifier, AGC, Equalization, Optical power budgeting line loading , analog systems : analog modulation ,
direct modulation , sub carrier modulation , distribution system, Optical TDM sub-carrier multiplexing ,WDM .
UNIT 6:
Coherent Systems :Coherent receiver, Homodyne and heterodyne detection, noise in coherent receiver, polarization
control, Homodyne receiver , Reusability and laser line-width, heterodyne receiver , synchronous, Asynchronous and self
synchronous demodulation, phase diversity receivers.
Text books :
1. John Gowar, “Optical Communication Systems”, PHI.
2. Gerd Keiser, “Optical Fiber Communication”, TMH
Reference Books:
1. Franz JH & Jain VK, “Optical Communication”, Narosa Publns
2. John M. Senior, “Optical Communication”, PHI
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-506 VLSI DESIGN
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Review of MOS technology: Basic MOS Transistors, Enhancement and Depletion mode transistors, N MOS and C MOS
process, thermal aspects of processing, Production of masks.
UNIT 2:
Electrical properties of MOS circuit : Parameters of MOS transistors, pass transistors, N MOS inverter, Pull-up to pull
down ratio for an N MOS inverter, C MOS inverters, MOS transistor circuit model, Latch up on C MOS circuits.
UNIT 3:
Design processes: MOS Layers, stick diagrams, Design rules, AWA OX C MOS process description, double metal single
poly silicon, C MOS process.
UNIT 4:
Basic circuit concepts: Sheets resistance, area capacitance, delay unit, inverter delay, super buffers, propagation delays.
UNIT 5:
Subsystem Design & Layout: Architectural issues in VLSI, switch logic, gate logic, Examples of Combinational logic,
Clocked sequential circuits, other system consideration.
UNIT 6:
Scaling of MOS circuits : Scaling factor, limitations, scaling of wires and interconnection, PLA and Finite state Machines.
UNIT 7:
Design Examples : Design of an ALU subsystems, carry look ahead address, parallel.
Text Books:
1. Pucknell D. A. and Eshrachain K, “Basic VLSI Design System & Circuits”. (PHI), 1988.
2. Geiger, Rr, Allen P. E. Strader N. R., “VLSI Design Techniques for Analog and Digital Circuit”, MGH1990
Reference Books:
1. Wolf, “Modern VLSI Design”, Pearson
2. SZE, “VLSI Technology”, TMH
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-508 WIRELESS MOBILE COMMUNICATION
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction to mobile radio systems: Paging systems, cordless telephone system, Cellular telephone systems- Cellular
concept, frequency reuse, channel assignment strategies, Interference and system capacity, trunking and grade of service,
cell splitting, sectoring, microcell zone concept, HO strategies.
UNIT 2:
Mobile radio propagation: mechanism, free space path loss, Multi path characteristics of radio waves, signal fading, Time
dispersion, Doppler spread, coherence time, fading statistics, diversity techniques ,RAKE Receiver, Interleaving
UNIT 3:
Introduction to spread spectrum communication, multiple access techniques used in mobile wireless communication:
FDMA/TDMA/CDMA, Cellular CDMA, capacity of cellular CDMA, OFDM, Wireless LAN’S, WLL.
UNIT 4:
Wireless systems and standards: GSM standards, signaling and call control, EDGE, mobility management, location
tracing, mobile data networking (mobile IP), wireless data services, IS-95, GPRS, Mobile Adhoc networks.
UNIT 5:
Third generation systems, Introduction to 4G.
Text Books:
1. T. S. Rappaport, “wireless Communications: Principles and practices”, PHI 1996.
2. William C. Y. Lee, “ Mobile Cellular Telecommunications, Analog and Digital Systems”, 2nd ed, MGH-1995.
3. Jochen Schiller –Mobile Communications, Pearson Education, India Ltd.
Reference Books:
1. Kaveh Pahlavan & Allen H. Levesque, “Wireless Information Networks”, Wiley series in Telecommunications and
Signal processing
2. Kamilo Feher: Wireless Digital communications, Modulation and Spread Spectrum Applications PHI 2001.
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-518 VLSI LAB
L T P Credits Marks
- - 3 3 Exams: 50
Sessionals: 50
Total: 100
Duration of Exam: 3 hrs.
(A few experiments may be designed & included in this list depending upon the infrastructure available in the institute)
1. Write a spice programme for CMOS inverter with following details:
pmos L=.8um W=12.0um, nmos L=.8um W=2.4um, nmos (kp=60u Vto=0.6v)
pmos (kp=20u Vto=-0.8v)
2. Write a spice programme for CMOS nand gate with following details:
Vdd=5volt, pmos L=.8um W=20um, nmos L=.8um W=8um, nmos (kp=45u Vto=1.0v)
pmos (kp=25u Vto=-1.2v)
3. Write a spice programme for CMOS nor gate with following details:
Vdd=5volt, pmos L=.8um W=20um, nmos L=.8um W=8um, nmos (kp=45u Vto=1.0v)
pmos (kp=25u Vto=-1.2v)
4. Design a d- latch with clk time period =6ns using nand gates with following specifications:
L=2U W=100U for n&p-mos, For n-mos Kn’=60U Vto =0.6V )
for p-mos Kp =20U Vto=-0.8V )
5. Design a half adder using nand gates with following specifications:
for n-mos: L=2U W=100U, for p-mos L=2U W=550U, For n-mos Kn’=60U Vto =0.6V )
for p-mos Kp =20U Vto=-0.8V )
6. Design a full adder using half adder designed above.
7. Design the layout for PMOS in layout editor.
8. Design the layout for NMOS in layout editor.
9. Design the layout for CMOS inverter with equal rise and fall time in layout editor.
10. Design the layout for 2-Input and 3-Input NAND gate.
11. Design the layout for 2-Input and 3-Input NOR gate.
12. Design the layout for clocked S-R flip-flop.
Note: The Scheme of awarding the grades to a student in the course will be supplied by the University to the examiner.
MEEC-520 OPTICAL COMMUNICATION LAB
L T P Credits Marks
- - 3 3 Exams: 50
Sessionals: 50
Total: 100
Duration of Exam: 3 hrs.
(A few experiments may be designed & included in this list depending upon the infrastructure available in the institute)
1. Study of optical devices.
2. Study of fiber optical detector.
3. Study of fiber optical transmitters
4. Determination of numerical aperture of optical fiber
5. Study of characteristics of LED.
6. Study of characteristics of LASER diode.
7. Setting a fiber optic analog link.
8. Setting a fiber optic digital link.
9. Study of modulation demodulation of light source by direct amplitude modulation techniques.
10. Forming a PC to PC communication link using optical fiber & RS 232.
11. Setting up a fiber optic voice link.
12. Study of modulation & Demodulation of light source by PPM technique.
13. Study of modulation & Demodulation of light source by PWM technique.
14. Study of Propagation loss & sending loss in optical fiber.
NOTE: The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner.
MEEC-510 RELIABILITY ENGINEERING
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction: Definition for Reliability, Need for reliability engineering, Causes of failures, catastrophic failures and
degradation failures. Characteristic types of failures, useful life of components, Exponential case of chance failures,
Reliability measures, Derivation for exponential distribution function, other kinds pf distributions, Binomial, Poisson
uniform, Rayleigh, Weibull, Gamma distributions, Markov chains, failures data analysis.
UNIT 2:
Reliability in Systems: Reliability Block Diagrams, series systems, parallel systems, K-out of - M systems, Open and short
circuit failures, standby systems. Reliability Analysis of Non-series Parallel system, Boolean Algebra Method, Cut-set
approach, delta star method, logical signal relation method, Bayes Theorem Method.
UNIT 3:
Reliability Prediction: Objective of reliability Prediction, Classification, information sources for failure rate data,
prediction methodologies, general requirement, role and limitations of reliability prediction.
UNIT 4:
Reliability Allocation: Subsystems reliability improvement, Apportionment for new units, criticality.
UNIT 5:
Redundancy Techniques for reliability: Forms of maintenance, measures of maintainability and availability,
maintainability function, availability function, two unit parallel system with repair, Markov model for two unit systems,
preventive maintenance, provisioning of spares.
[
UNIT 6:
Reliability Testing: Kinds of testing, component reliability measurements parametric methods, confidence limits,
accelerate testing, equipment acceptance testing.
UNIT 7:
Economics of Reliability Engineering: Reliability cost, effect of reliability on cost. Reliability achievement cost models,
reliability utility cost models, replacement policies.
UNIT 8:
Integrated performance measures for communication systems: Integration of reliability and capacity, Delay related
reliability.
Text Books:
1. KK Aggarwal, “Reliability Engineering”, Kluwer Academic Netherlands.
2. B Singh, “Quality Control and Reliability Analysis”, Khanna Publishers.
Reference Books
1. KB Mishra: Reliability Prediction & Analysis: A Methodology oriented treatment ,Elseveir,Netherlands
2. Ebeling, “Introduction to Reliability & Maintainability”, TMH
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-512 TELECOMMUNICATION SWITCHING SYSTEMS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction: Basic line circuits in telephony and telegraphy; long-haul communication circuits; statistical bandwidth
sharing, principles of traffic switching, & signaling: schemes, CCS7.
UNIT 2:
Reviewof Switching System: Strowger's and crossbar switches; switching system hierarchy, SPC switching, basic call
processing, Level l, 2 & 3 controls, interface controller, network control processor, central processor, switching fabric-SDS,
TDS, STS, TST, TTT, single stage and multi-stage switching network, principles of large-scale, switch design.
UNIT 3:
Traffic Engineering and Tele-traffic Theory: Markov processes representing traffic. Calculation of blocking probability,
stationary probability measures for Ergodic Markov processes, Combinatorial interpretation, calculation of blocking
probability.
UNIT 4:
Switching Network Control and management: Data networks and protocols, ISDN. Message handling systems/intelligent
networks, multi service broadband switching fabrics- ATM., current trends in digital switching systems.
Text Books:
1. Thiagarajan Viswanathan, “Telecommunication Switching Systems and Networks”, PHI
2. Syed Riffat Ali, “Digital switching Systems, system reliability and analysis”, Tata MC Graw, 2002.
Reference Books:
1. Keshav S, “An Engineering Approach to Computer Network Networking”, Addison Wesley, 1998.
2. Martin, “Telecommunication & Computer 3e”, PHI
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-514 MULTIMEDIA SYSTEMS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction: multimedia networks, Telephone networks, Data netwoks, Broadcast television networks, Integrated
services digital networks, Broadband multiservice networks, Multimedia Applications, application and networking
Terminlogy: media types, communication modes, network types, multipoint conferencing, network QOS, Application
QOS.
UNIT 2:
Multimedia Information Representation: Digitization principles, Encoder Design, Decoder Design, Unformatted Text,
Formatted Text, Hypertext, Images: Graphics, Digitized documents, Digitized pictures; Audio: PCM speech, CD-qualty
audio, Synthesized audio; Video: Broadcast television, Digital vedio, PC vedio, vedio content.
UNIT 3:
Text and Image Compression: Compression Principles, Static Huffman coding, Dynamic Huffman Coding, Arithmatic
Coding, Graphics Interchange Format, Tagged image file format, digitizes documents, digitized pictures, JPEG.
UNIT 4:
Audio and Video Compression: Differential Pulse Code Modulation, Adaptive Differential PCM, Adaptive predictive
coding, Linear Predictive coding, Code –excited LPC, Perceptual Coding, MPEG Audio coders, Dolby audio coders, video
compression principles, MPEG, MPEG1, MPEG2, MPEG4
UNIT 5:
Standards for multimedia Communications: TCP/ IP reference model, Protocol basics, Circuit mode networks, Packetswitched
networks, Electronic mail, Information browsing over internet, electronic commerce, Intermediate systems, Java
and javascript, Standards for entertainment applications.
UNIT 6:
Multimedia and Internet: The internet and how it works, Internetworking, connections, Internet services, The world wide
web and HTML, Dynamic web pages and XML, multimedia on the web, web browsers, web servers, web page makers
and site builders, plug-ins and delivery vehicles, designing for the world wide web: working on the web, the workspace,
nibbling, HTML and multimedia, Text for the web, making columns of text, flowing text around images, images for the
web, GIF and PNG Images, JPEG Images, Using Photoshop, Backgrounds, clickable buttons, Image maps, sound for the
web, animation for the web.
Text Books:
1. Fred Halsall, “Multimedia Communications”, Pearson
2. Tay Vaughan, “Multimedia, making it work” fifth edition, Tata McGraw-Hill Edition
Reference Books:
1. Rao, Bojkovic & Milovanovic, “Multimedia Comm. System: Techniology , Std. & Network”, PHI
2. John F. Koegel Bufod, “Multimedia Systems”, Addison Wesley, Edition. 2000
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-516 STATISTICAL MODELS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
.
UNIT 1:
Random Variables: Probability Bay's rule, Distribution function, Discrete random vectors, different distributions, jointly
distributed random variables, order statistics, Distribution of sums, expectations, moments, transform methods mean
time to failure, Inequalities and limit theorems, Mixture distribution, Conditional expectations, Imperfect fault coverage &
reliability, Random Sums.
UNIT 2:
Stochastic Process: Classification Bernoulli process, Poisson process, Renewal Processes, available analysis, Random
incidence, Renewal model of program behavior.
UNIT 3:
Markov Chains: n-step transition probabilities, limiting distribution, Distribution of times between state changes,
Irreducible finite chains with a periodic states, The M/ g/ I, Queuing System Discrete parameter, Birth Death Processes,
Markov chains with absorbing states. Birth and death Processes, Non Birth Death Processes.
UNIT 4:
Network of Queues: Open and close queuing networks, Non exponential service time distributions and multiple job type,
non-product form networks.
UNIT 5:
Correlation & Regression: Introduction, Least squares curve fitting. Coefficient of determination, Confidence of intervals
in linear regression, correlation analysis, Non-linear regression, Analysis of variance.
TEXT BOOK:
1. K.S. Trivedi: Probability and Statistics, PHI. 3rd Edition.
2. Mood, “Introduction to Theory of Statistic”,TMH
ReferenceBooks:
1. Spiegel, “Statistic 3eSchaum outline series”, TMH
2. Hogg, “Introduction to Mathematical statistic”, Pearson
3. Walpole, “Probability and Statistic for Engineers & Scientist”, Pearson
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-601 NEURAL NETWORKS & FUZZY LOGICS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction: Neural networks characteristics, difference between biological neuron & A.N.N, History of development in
neural networks principles, Artificial neural net terminology, Model of a neuron, Topology.
UNIT 2:
Neural network models: feedforward network, feedback network, Supervised, Unsupervised, Re-inforcement learning.
Knowledge, representation and acquisition. Basic Hop field model.
UNIT 3:
Neural Network learning rules : Types of learning, Hebbian learning, Perceptron learning, Delta learning, Window –Hoff
Learning correlation Learning, Winner- Take – All learning rule.
UNIT 4:
Artificial Neural Networks: Radial basis function neural networks, Basic learning laws in RBF nets, Recurrent back
propagation. Introduction to counter propagation networks, ART networks, Associative Memories.
UNIT 5:
Applications of neural nets: Applications such as pattern recognition, Pattern mapping, Associative memories, speech and
decision-making..
UNIT 6:
Fuzzy Logic: Basic concepts of fuzzy logic, Fuzzy vs. Crisp set, Linguistic variables, Membership functions, Fuzzy sets &
Operations of fuzzy sets, Fuzzy IF- THEN rules, Variable inference techniques, De-Fuzzification, Basic fuzzy inference
algorithm, Fuzzy system design, Industrial applications.
Text Books:
1. B. Yegnanarayana, " Artificial Neural Networks”PHI
2. J.M. Zurada, “Introduction to artificial neural systems”, Jaico Pub.
3. ROSS J.T , “Fuzzy logic with engineering application”, TMH
Reference Books:
1. Simon Haykin, “Neural Networks”, PHI
2. Ahmad M.Ibrahim, “Introduction to applied Fuzzy Electronics”, (PHI)
3. P.D. wasserman, “Neural computing theory & practice”, (ANZA PUB).
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-603 CDMA SYSTEMS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction to Access Technologies, Direct Sequence Spread Spectrum and Spreading Codes, Types of Techniques used
for spread spectrum, the concept of spread spectrum system, Performance of DSSS system, Bit Scrambling,
Pseudorandom Noise sequences.
UNIT 2:
Diversity: Diversity reception, types of Diversity, Basic Combining Methods, BPSK Modulation and Diversity.
UNIT 3:
IS –95 System Architecture: Introduction, Refernce Model, Functionable Model Based on Refernce Model, Wireless
Intelligent Network, TIA-95 CDMA System, Forward Link, Reverse Link.
UNIT 3:
Physical and logical channels of IS -95 CDMA: Introduction, Physical Channels, Modulation, Bit Repetition, Block
Interleaving, Channel coding Logical Channels, Paging Channels, access channels, Forward Traffic channels, Reverse
Traffic Channels.
UNIT 4:
CDMA Call Processing: Introduction, CDMA Call processing States, CDMA Registration, Authentication.
UNIT 5:
Handoffs: Introduction, Types of Handoff, Pilot sets, Search Windows, Handoff parameters, Handoff Messages, Handoff
Procedures, Set up and End of soft Hand off, Need of Power Control, Reverse Link Power Control, Forward link Power
Control.
UNIT 6:
Security and Identification: Introduction, Mobile identification parametrs, Authentication procedures.
UNIT 7:
Reverse and forward Link Capacity: Introduction, Reverse Link Capacity, Multicell Network, Intercell interference,
Erlang Capacity of a single cell, Forward Link Capacity, CDMA cell size.
Text Books:
1. Garg, “CDMA : 2000 : Cellular/ PCS system Implementation”, Pearson
2. Andrew J. Viterbi, “CDMA Principles of spread spectrum communications”, Addison Wesley 1995.
Reference Books:
1. J.S. Lee and L.E. Miller, “ CDMA system Engineering handbook”, Artech house 1998.
2. Steve Lee, “Spread spectrum CDMA”, TMH
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-605 EMERGING NETWORK TECHNOLOGIES
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
.
UNIT 1:
Foundations: virtual circuits, PVC, SVC, SPVC, connection oriented and connectionless systems, variable bit rate and
constant bit rate applications, flow control and connection management, addressing and identification schemes,
multiplexing methodologies, network interface.
UNIT 2:
System & topology: TI/ lE I CARRIER systems, topology, X.25, layers, POUs, ISON- typical topology, layers, and PDUs,
SS7, FOOl, Frame relay, standards, topology, layers, OSI and ANSI layers. frame relay protocol data unit Frame relay
network to network interface.
UNIT 3:
Fast and switched Ethernet: generation of LANs, switched Ethernet, architecture, store and forward and Cut through
switches, virtual LAN, Fast Ethernet, 100BASET.
UNIT 4:
ATM standards & topology: ATM standards, topology, VPI and VCI Labels, ATM layers, ATM and B-ISDN model, cells,
ATM switching, AAL types, traffic management in ATM network, SONET/ SDH: synchronous networks, standards,
topology, automatic protection switching, multiplexing structure, payloads and envelopes, payload pointers, Introduction
to broad band signaling networks.
Text Books:
1. Uyless Black, “ Emerging Communication Technologies”, 2nd Ed, Prentice hall 1997.
2. Sumit Kasera and Pankaj Sethi, “ATM Networks, Concepts and Protocols”, TMGH 2001
Reference Books:
1. Behrouz Forouzan: Introduction to Data Communication and Networking, Tata Mc-Graw hill 1999.
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-607 DIGITAL SIGNAL PROCESSORS AND APPLICATIONS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
SDP 56002: Architecture, CPU, ALU, Program Controller, Address Generation Unit, Addressing Modes, Interrupt,
Priority register.
UNIT 2:
DSP 56002 Instruction Set: Instruction Formats Parallel move operating parallel move types, instructions set, move
arithmetic logic, bit manipulation, loop, programmed control instructions.
UNIT 3:
Applications: Designing and implementing FIR, IIR filters, implementing Fast Fourier. Transforms with DSP 56002.
UNIT 4:
TMS - 320 Architecture, and Instruction Set, Addressing, Interrupt Structure, Programming.
TEXT BOOK:
1. Mohammed EL. Sharkawy: Digital Signal Processor Applications with Motorola's DSP 56002. PTR.
2. Venkat Ramani, “Digital Signal Processor :Theory, Programming & Applications”, TMH
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-609 IMAGE PROCESSING
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Introduction: Fundamental steps in Digital Image Processing, Components of an Image Processing system, Digital Image
Fundamentals: Elements of Visual Perception, Light and the electromagnetic spectrum, Image sensing and Acquisition,
simple image formation model.
UNIT 2:
Image sampling and Quantization: concept of sampling & quantization, Representation of digital images, spatial and
Gray-level resolution, Relationships between pixels-neighbors of pixel, Adjacency, connectivity, regions, and boundaries,
distance measures, Image operations on a pixel basis.
UNIT 3:
Image enhancement in Spatial domain: some basic Gray Level Transformations, Image negatives, log transformations,
Power-Law transformations, piecewise –Linear Transformation functions; Histogram Processing, Enhancement using
arithmetic/logic operations, Basics of spatial filtering.
UNIT 4:
Image Enhancement in frequency domain: Introduction to Fourier Transform and frequency domain, Two dimensional
DFT and its inverse, Filtering in the frequency domain, correspondence between filtering in the spatial and frequency
domains; Smoothing frequency domain filters: Ideal lowpass filters, butterworth lowpass filters, Gaussian lowpass filters;
sharpening frequency domain filters(Ideal, butterworth & Gaussian highpass filters) Homomorphic filtering,
Implementation: properties of 2-D Fourier Transform, Computation of inverse Fourier Treansform using forward
Transform algorithm, Fast Fourier Transform.
UNIT 5:
Image Restoration: A model of the image degradation/ restoration process, Noise models: Spatial and frequency
properties of noise, Periodic noise, Estimation of noise parameters, Restoration in the presence of noise only spatial
filtering: Mean Filters, Order statistics Filters, Adaptive filters; Periodic noise reduction by frequency domain filtering,
Estimating the Degradation Function, Inverse Filtering. Minimum Mean Square Error (Wiener) filtering
UNIT 6:
Image Compression: Fundamentals, Image Compression Models: The source encoder and decoder, the channel encoder
and decoder, elements of information theory: Measuring information, The information channel, Fundamental coding
theorems; error free compression, lossy compression.
UNIT 7:
Image Segmentation: Detection of Discontinuities: Point detection, Line Detection, Edge detection; Edge Linking and
Boundary detection, Thresholding: Role of Illumination, basic global thresholding, basic adaptive thresholding, Regional
based segmentation: Basic Formulation, Region growing, region splitting and merging; use of motion in segmentation:
Spatial Techniques, Frequency Domain Techniques.
Text Books:
1. Rafael C. Gonzalez and Richard E. Woods, “Digital Image Processing”, Pearson
2. Anil K Jain, “Fundamentals of Digital Image Processing”, PHI Edition 1997.
Reference Books:
1. Keenneth R Castleman, " Digital Image Processing”, Pearson
2. Chanda & Majumder, “Digital Image Processing & Analysis”, PHI
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC-611 COMPUTER COMMUNICATIONS
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals: 50
Total: 150
Duration of Exam: 3 hrs.
UNIT 1:
Data Communication: Introduction to data communication and network architecture of reference models.
UNIT 2:
Network protocols: Local area network protocols. IEEE standards for LAN. Fibre optic networks. Satellite networks. Data
link layer design issues: its functions and protocols.
UNIT 3:
Internet Protocol: Internet protocol. Routing Algorithms, Factors affecting routing algorithms. Congestion control
algorithms. IP addressing schemes. Internetworking and sub-netting.
UNIT 4:
Transport and application layer: Transport and application layer design issues. Connection management. Transport
protocol on top of X.25. File transfer and access management.
UNIT 5:
Cryptography: Basic objectives of cryptography, Secret-key and Public-key cryptography, Block Ciphers: Mode of
operation. Data Encryption Standard and its variants. AES. Stream ciphers, Message authentication and hash functions.
UNIT 6:
Intractable Problems: RSA problem, discrete logarithm problem, Diffie Hellmann problem. Key exchange: Diffie
Hellmann Algorithms, Key management. Authentication and Digital signatures.
UNIT 7:
Modelling and Analysis: Modelling and Analysis of Computer Communication Networks: Pure Birth and Birth-Death
Process. Bernoulli Trials-Markov Chains. Poisson Process. Calculation of Delay-Little's Formula, Burke's Theorem.
Queueing Models: M/ M/ 1, M/ M/ 1/ N, M/ M/ S, M/ M/ S/ N queues. Imbedded Markov Chains-M/ G/ 1 queue.
Network layout and reliability considerations.
Text Books:
1. Stallings, “Data communication & Networking”, PHI
2. Tanenbaum, “Computer Networks”, PHI
References Books:
1. Jeremiah F. Hayes: Modelling and Analysis of Computer Communication Networks, PHI
2. Forouzan, “Data communications and networking”, TMH
3. Godbole, “Data communications and network”, TMH
NOTE:
1. In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be
required to attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular
phone etc. will not be allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner
of answer books.
MEEC – 613 SEMINAR
L T P Credits Marks
- - 2 2 Class Work: 50
Total: 50
The objectives of the course remain:
To learn how to carryout literature search
To learn the art of technical report writing
To learn the art of verbal communication with the help of modern presentation techniques
A student will select a topic in emerging areas of Engineering & Technology and will carry out the task under the
supervision of a teacher assigned by the department.
He/ She will give a seminar talk on the same before a committee constituted by the chairperson the department.
The committee should comprise of 2 or 3 faculty members from different specializations. The teacher(s) associated in the
committee will each be assigned 2 hours teaching load per week.
However, supervision of seminar topic will be in addition to the regular teaching load.
MEEC – 617 DESSERTATION ( PHASE-I)
L T P Credits Class Work : 100 Marks
- - 4 4
The primary objective of this course is to develop in student the capacity for analysis & judgment and the ability to carry
out independent investigation in design / development through a dissertation work involving creativity, innovation and
ingenuity. The work must start with comprehensive literature search and critical appreciation thereof so as to select
research problem the student wishes to work on.
Each student will carry out independent dissertation under the supervision of some teacher(s) who will be called
Supervisor(s). In no case more than two supervisors can be associated with one dissertation work.
The dissertation involving design/ fabrication/ testing/ computer simulation/ case studies etc. which commences in the
III Semester will be completed in IV Semester. The evaluation of the dissertation phase –I besides approval of the
dissertation topic of the students will be done by a committee constituted as under:
Chairperson of Department : Chairperson
M Tech Coordinator / Sr Faculty : Member Secretary
Respective dissertation supervisor : Member
The student will be required to submit two copies of his/her report to the department for record (one copy each for the
department and participating teacher).
MEEC – 602 DESSERTATION
L T P Credits Class Work : 50 Marks
- - 20 20 Exam : 100 Marks
The dissertation started in III Semester will be completed in IV Semester and will be evaluated in the following manner.
Internal Assessment
Internal Assessment (class work evaluation) will be effected as per ordinance through interim report, presentation and
discussion thereon by the following committee of three persons:
Chairperson of Department : Chairperson
M Tech Coordinator/ Sr Faculty : Member Secretary
Respective dissertation supervisor : Member
External Assessment
Final dissertation will be assessed by a panel of examiners consisting of the following:
Chairperson of Department : Chairperson
Respective Supervisor(s) : Member(s)
External expert : To be appointed by the University
Note: The External Expert must be from the respective area of specialization. The chairperson & M Tech Coordinator
with mutual consultation will divide the submitted dissertations into groups depending upon the area of specialization
and will recommend the list of experts for each group separately to the V C for selecting the examiners with the note
that an external expert should be assigned a maximum of FIVE dissertations for evaluation.
The student will be required to submit THREE copies of his/ her report to the M Tech Coordinator for record and
processing.
DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE AND TECHNOLOGY, MURTHAL
SCHEME OF GRADING SYSTEM (I TO IV SEMESTERS)
MASTER OF TECHNOLOGY IN
ELECTRONICS & COMMUNICATION
The grade awarded to a student in any particular course will be based on his/ her performance in class work, attendance,
seasonal tests, tutorial tests, home assignments, laboratory work, viva-voce examination, main examination, etc.
The letter grades that can be awarded & their equivalent grade point are listed below: -
Grade Grade Points Description of Performance
A(+) 10 Outstanding
A 9 Excellent
B(+) 8 Very Good
B 7 Good
C(+) 6 Average
C 5 Below Average
D 4 Marginal
F 0 Very poor
G - Absent
AP - Audit Pass
AF - Audit Fail
X - Incomplete
Process of Evaluation:
The performance of the student will be evaluated in terms of cumulative grade point average ( CGPA) which is the grade
point average for all the completed semesters at any point of time. The CGPA id calculated on the basisi of all pass grades,
except audit courses, obtained in all completed semsters, provided that there are no ‘F’,’G’,’AF’,’X’ grades.
(Number of Credits x Grade Points) for courses with pass grade except audit courses.
SGPA = ------------------------------------------------------------------------------------------------------------------------
(Number of Credits) for courses with pass grades except audit courses.
Note:
SGPA will be calculated for each semester individually.
CGPA will be calculated by taking average of SGPA of both the semesters in academic year.
Pass Grade is Grade D and higher grades.
Grade F is fail Grade.
`F’ Grade: The F grade denotes poor performance, i.e. failing a subject (or subject component).A student has to reappear
in the sem. Exam only in which he/she obtains `F’ grade, until a passing grade is obtained, within a stipulated time of
completion of that program as mentioned in the ordinance. For the elective sub in which ‘f’ grades have been obtained,
the students may take the same course or any other course from the same category/group. The candidate will be allowed
to take up the exam next time along with regular students but he/she will be awarded up to B+ only. The same principle
will be applicable to project also.
‘G’ grade: If any student who is otherwise eligible for appearing in semester examination as per ordinance, but he/ she is
unable to appear in the semester exam than he/ she will be awarded ‘G’ grade. The candidate will be allowed to take up
the exam next time along with regular students and he/ she will be awarded the grade as per grade system explained
above and the restriction of awarding a maximum of ‘B+’ grade will not be applicable in his/ her case. The same principle
will be applicable to the project also.
AP/AF Grade: These grades are awarded to qualifying/ non credit subjects ( as per scheme supplied by the department).
The candidate will not be eligible for the award of the degree without qualifying theses courses.
Continuous absence: If a student is continuous absent from the department for more than four weeks without intimation
to the chairperson of the department, his/ her name will be struck of from the roll of the department. The readmission
shall not be allowed to the candidate during the same academic session.
‘X’ Grade: This grade is awarded for incomplete project work/ dissertation as per guidelines given below and will be
converted to a regular grade on the completion of the project work and its evaluation.
A student who is unable to complete his/ her project/ dissertation may be awarded an ‘X’ grade by the
chairman/ chairperson on the recommendation of his/ her supervisor. Student who has been awarded ‘X’ grade shall be
required to formally register for the next semester and pay the requisite fees.
HUM-202 FUNDAMENTALS OF MANAGEMENT
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT-I
Meaning of management, Definitions of Management, Characteristics of management, Management Vs. Administration.
Management-Art, Science and Profession. Importance of Management. Development of Management thoughts.
Principles of Management. The Management Functions, Inter-relationship of Managerial functions.
UNIT-II
Nature andSignificance of staffing, Personnel management, Functions of personnel management, Manpower planning,
Process of manpower planning, Recruitment, Selection; Promotion - Seniority Vs. Merit. Training - objectives and types of
training.
UNIT-III
Production Management : Definition, Objectives, Functions and Scope, Production Planning and Control; its significance, stages in
production planning and control. Brief introduction to the concepts of material management, inventory control; its importance and various methods.
UNIT-IV
Marketing Management - Definition of marketing, Marketing concept, objectives & Functions of marketing.
Marketing Research - Meaning; Definition; objectives; Importance; Limitations; Process. Advertising - meaning of advertising,
objectives, functions, criticism.
UNIT-V
Introduction of Financial Management, Objectives of Financial Management, Functions and Importance of Financial Management. Brief
Introduction to the concept of capital structure and various sources of finance.
BOOKS RECOMMENDED :
TEXT BOOKS :
1. Principles and Practice of Management - R.S. Gupta, B.D.Sharma, N.S. Bhalla. (Kalyani Publishers)
2. Organisation and Management - R.D. Aggarwal (Tata Mc Graw Hill)
REFERENCE BOOKS :
1. Principles & Practices of Management –L.M. Prasad (Sultan Chand & Sons)
2. Management –Harold, Koontz and Cyrilo Donell (Mc.Graw Hill).
3. Marketing Management –S.A. Sherlikar (Himalaya Publishing House, Bombay).
4. Financial Management - I.M. Pandey (Vikas Publishing House, New Delhi)
5. Management - James A.F. Stoner & R.Edward Freeman, PHI.
NOTE: Eight questions are to be set atleast one question from each unit and the students will have to attempt five questions in all.
MATH-202 NUMERICAL METHODS
(COMMON FOR EE,EL,CHE,EI,IC & ELECTIVE FOR CSE,IT IN 8th SEM.)
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
Part-A
Interpolation and curve fitting : Interpolation problem, Lagrangian polynomials, Divided differences, Interpolatingwith a cubic spline, Bezier curves
and B-spline curves, Least square approximations.
Non-Linear Equations : Bisection method, Linear Interpolation methods, Newton's method, Muller's method, fixed-point method.
Simultaneous Linear Equations : Elimination method, Gauss and Gauss-Jordan method, Jacobi's method, Gauss-Seidal method, Relaxation
method.
Numerical Differentiation and Integration : Derivatives from differences tables, Higher order derivatives, Extrapolation techniques, Newton-cotes
integration formula, Trapezoidal rule, Simpson's rules, Boole's rule and Weddle's rule, Romberg's Integration.
Part-B
Numerical Solution of Ordinary Differential Equations : Taylor series method, Euler and modified Euler method, Runge-Kutta methods, Milne's
method, Adams-Moulton method, Power method for Eigen values by iteration.
Numerial Solution of Partial Differential Equations : Finite difference approximations of partial derivatives, solution of Laplace equation (Standard
5-point formula only), one-dimensional heat equation (Schmidt method, Crank-Nicolson method, Dufort and Frankel method) and wave
equation.
TEXT BOOKS :
1. Applied Numerical Analysis : Curtis F. Gerald and Patrick
G. Wheatley-Pearson, Education Ltd.
2. Numerical Method : E. Balagurusamy T.M.H.
REFERENCE BOOKS :
1. Numerical Methods for Scientific and Engg. Computations : M.K. Jain, S.R.K. Iyenger and R.K. Jain-
Wiley Eastern Ltd.
2. Introductory Methods of Numerical Analysis S.S. Sastry, P.H.I.
3. Numerical Methods in Engg. & Science : B.S. Grewal.
Note: Examiner will set eight questions, taking four from Part-A and four from Part-B. Students will be required to attempt five questions taking
atleast two from each part.
ECE-202 ANALOG ELECTRONICS
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT 1 SEMICONDUCTOR DIODE :
P-N junction and its V-I Characteristics, P-N junction as a rectifier, Switching characteristics of Diode.
UNIT 2 DIODE CIRCUITS :
Diode as a circuit element, the load-line concept, half-wave and full wave rectifiers, clipping circuits, clamping circuits, filter circuits,
peak to peak detector and voltage multiplier circuits.
UNIT 3 TRANSISTOR AT LOW FREQUENCIES:
Bipolar junction transistor : operation, characteristics, Ebers-moll model of transistor, hybrid model, h-parameters (CE, CB, CC
configurations), analysis of a transistor amplifier circuits using h-parameters, emitter follower, Miller's Theorem , frequency response
of R-C coupled amplifier.
UNIT 4 TRANSISTOR BIASING :
Operating point, bias stability, collector to base bias, self-bias, emitter bias, bias compensation, thermistor & sensistor compensation.
UNIT 5 TRANSISTOR AT HIGH FREQUENCIES:
Hybrid P model, CE short circuit current gain, frequency response, alpha, cutoff frequency, gain bandwidth product, emitter
follower at high frequencies.
UNIT 6 FIELD EFFECT TRANSISTORS :
Junction field effect transistor, pinch off voltage, volt-ampere characteristics, small signal model, MOSFET Enhancement &
Depletion mode, V-MOSFET.Common source amplifier, source follower, biasing of FET, applications of FET as a voltage variable
resistor (V V R).
UNIT 7 REGULATED POWER SUPPLIES :
Series and shunt voltage regulators, power supply parameters, three terminal IC regulators, SMPS.
TEXT BOOK :
1 .Integrated Electronics: Millman & Halkias ; McGrawHill
2. Electronic circuit analysis and design (Second edition): D.A.Neamen; TMH
REFERENCE BOOKS:
1. Electronics Principles: Malvino ; McGrawHill
2. Electronics Circuits: Donald L. Schilling & Charles Belove ; McGrawHill
3. Electronics Devices & Circuits: Boylestad & Nashelsky ; Pearson.
NOTE: Eight questions are to be set in all by the examiner taking at least one question from each unit. Students will be required to
attempt five questions in all.
ECE-204 DIGITAL ELECTRONICS
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT 1 FUNDAMENTALS OF DIGITAL TECHNIQUES :
Digital signal, logic gates: AND, OR, NOT, NAND, NOR, EX-OR, EX-NOR, Boolean algebra. Review of Number systems. Binary
codes: BCD, Excess-3, Gray, EBCDIC, ASCII, Error detection and correction codes.
UNIT 2 COMBINATIONAL DESIGN USING GATES:
Design using gates, Karnaugh map and Quine Mcluskey methods of simplification.
UNIT 3 COMBINATIONAL DESIGN USING MSI DEVICES
Multiplexers and Demultiplexers and their use as logic elements, Decoders, Adders / Subtractors, BCD arithmetic circuits, Encoders,
Decoders / Drivers for display devices.
UNIT 4 SEQUENTIAL CIRCUITS:
Flip Flops : S-R, J-K, T, D, master-slave, edge triggered, shift registers, sequence generators, Counters, Asynchronous and
Synchronous Ring counters and Johnson Counter, Design of Synchronous and Asynchronous sequential circuits.
UNIT 5 DIGITAL LOGIC FAMILIES:
Switching mode operation of p-n junction, bipolar and MOS. devices. Bipolar logic families:RTL, DTL, DCTL, HTL, TTL, ECL, MOS,
and CMOS logic families. Tristate logic, Interfacing of CMOS and TTL families.
UNIT 6 A/D AND D/A CONVERTERS:
Sample and hold circuit, weighted resistor and R -2 R ladder D/A Converters, specifications for
D/A converters. A/D converters : Quantization, parallel -comparator, successive approximation, counting type, dual-slope ADC,
specifications of ADCs.
UNIT 7 PROGRAMMABLE LOGIC DEVICES:
ROM, PLA, PAL, FPGA and CPLDs.
TEXT BOOK :
1. Modern Digital Electronics(Edition III) : R. P. Jain; TMH
REFERENCE BOOKS :
1. Digital Integrated Electronics : Taub & Schilling; MGH
2. Digital Principles and Applications : Malvino & Leach; McGraw Hill.
3. Digital Design : Morris Mano; PHI.
NOTE : Eight questions are to be set in all by the examiner taking at least one question from each unit. Students will be required to
attempt five questions in all.
ECE-206 COMMUNICATION SYSTEMS
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT 1. INTRODUCTION TO COMMUNICATION SYSTEMS :
The essentials of a Communication system, modes and media’s of Communication, Classification of signals and systems , Fourier
Analysis of signals.
UNIT 2. AMPLITUDE MODULATION :
Amplitude modulation, Generation of AM waves, Demodulation of AM waves, DSBSC, Generation of DSBSC waves, Coherent
detection of DSBSC waves, single side band modulation, generation of SSB waves, demodulation of SSB waves, vestigial sideband
modulation (VSB).
UNIT 3. ANGLE MODULATION :
Basic definitions: Phase modulation (PM) & frequency modulation(FM), narrow band frequency modulation, wideband frequency
modulation, generation of FM waves, Demodulation of FM waves.
UNIT 4. PULSE ANALOG MODULATION :
Sampling theory, time division (TDM) and frequency division (FDM) multiplexing, pulse amplitude modulation (PAM), pulse time
modulation.
UNIT 5. PULSE DIGITAL MODULATION :
Elements of pulse code modulation, noise in PCM systems, Measure of information, channel capacity, channel capacity of a PCM
system, differential pulse code modulation (DPCM). Delta modulation (DM)
UNIT 6. DIGITAL MODULATION TECHNIQUES:
ASK, FSK, BPSK, QPSK, M-ary PSK.
UNIT 7. INTRODUCTION TO NOISE:
External noise, Internal noise, S/N ratio, noise figure.
TEXT BOOKS :
1. Communication systems (4th edn.) : Simon Haykins; John wiley & sons.
2. Communication systems: Singh & Sapre; TMH.
3. Analog Communication: Manoj Duhan; I.K International.
REFERENCE BOOKS :
1. Electronic Communication systems : Kennedy; TMH.
2. Communication Electronics : Frenzel; TMH.
3. Communication system : Taub & Schilling; TMH.
4. Communication systems : Bruce Carlson.
NOTE: Eight questions are to be set in all by the examiner taking at least one question from each unit. Students will be required to
attempt five questions in all.
EE-208 ELECTROMAGNETIC THEORY
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT1.STATIC ELECTRIC FIE0LDS:
Coulomb’s Law, Gauss’s Law, potential function, field due to a continuous distribution of charge, equi-potential surfaces, Gauss’s
Theorem, Poison’s equation, Laplace’s equation, method of electrical images, capacitance, electro-static energy, boundary conditions,
the electro-static uniqueness theorem for field of a charge distribution, Dirac-Delta representation for a point charge and an infinitesimal
dipole.
UNIT2. STEADY MAGNETIC FIELDS :
Faraday Induction law, Ampere’s Work law in the differential vector form, Ampere's law for a current element, magnetic field due to
volume distribution of current and the Dirac-delta function, Ampere’s Force Law, magnetic vector potential, vector potential (Alternative
derivation), far field of a current distribution, equation of continuity.
UNIT3. TIME VARYING FIELDS :
Equation of continuity for time varying fields, inconsistency of Ampere’s law, Maxwell’s field equations and their interpretation, solution
for free space conditions, electromagnetic waves in a homogeneous medium, propagation of uniform plane-wave, relation between E &
H in a uniform plane-wave, wave equations for conducting medium, Maxwell’s equations using phasor notation, wave propagation in a
conducting medium, conductors, dielectrics, wave propagation in good conductor and good dielectric, depth of penetration,
polarization, linear, circular and elliptical,
UNIT4. REFLECTION AND REFRACTION OF E M WAVES:
Reflection and refraction of plane waves at the surface of a perfect conductor & perfect dielectric (both normal incidence as well as
oblique incidence), Brewester's angle and total internal reflection, reflection at the surfaces of a conductive medium, surface
impedance, transmission-line analogy, poynting theorem, interpretation of E x H, power loss in a plane conductor.
UNIT5.TRASMISSION LINE THEORY :
Transmission line as a distributed circuit, transmission line equation, travelling ,standing waves , characteristic impedance, input
impedance of terminated line, reflection coefficient, VSWR, Smith's chart and its applications.
TEXT BOOK :
1. Electro-magnetic Waves and Radiating System : Jordan & Balmain, PHI.
Refrence Books:
1. Engineering Electromagnetics : Hayt; TMH
2. Electro-Magnetics : Krauss J.DF; Mc Graw Hill.
NOTE: 8 questions are to be set –atleast one from each unit. Students have to attempt any five questions.
ECE-222 ANALOG ELECTRONICS-LAB
L T P Credits Class Work : 25Marks
- - 2 2 Theory : 25 Marks
Total : 50 Marks
Duration of Exam. : 3 Hrs.
LIST OF EXPERIMENTS:
1. Study of Half wave & full wave rectifiers.
2. Study of power supply filters.
3. Study of Diode as clipper & clamper.
4. Study of Zener diode as a voltage regulator.
5. Study of CE amplifier for voltage, current & Power gains and input, output impedances..
6. Study of CC amplifier as a buffer.
7. To study the frequency response of RC coupled amplifier.
8. Study of 3-terminal IC regulator.
9. Study of transistor as a constant current source in CE configuration.
10. Study of FET common source amplifier.
11. Study of FET common Drain amplifier.
12. Graphical determination of small signal hybrid parameters of bipolar junction transistor.
13. Study & design of a d.c. voltage doubler.
NOTE : At least ten experiments are to be performed, atleast seven experiments should be performed from above list. Remaining
three experiments may either be performed from the above list or designed & set by the concerned Department as per the scope of the
syllabus.
ECE-224 DIGITAL ELECTRONICS LAB
L T P Credits Class Work : 25Marks
- - 2 2 Theory : 25 Marks
Total : 50 Marks
Duration of Exam. : 3 Hrs.
LIST OF EXPERIMENTS:
1. Study of TTL gates –AND, OR, NOT, NAND, NOR, EX-OR, EX-NOR.
2. Design & realize a given function using K-maps and verify its performance.
3. To verify the operation of multiplexer & Demultiplexer.
4. To verify the operation of comparator.
5. To verify the truth tables of S-R, J-K, T & D type flip flops.
6. To verify the operation of bi-directional shift register.
7. To design & verify the operation of 3-bit synchronous counter.
8. To design and verify the operation of synchronous UP/DOWN decade counter using J K flip-flops & drive a seven-segment display
using the same.
9. To design and verify the operation of asynchronous UP/DOWN decade counter using J K flip-flops & drive a seven-segment display
using the same.
10. To design & realize a sequence generator for a given sequence using J-K flip-flops.
11. Study of CMOS NAND & NOR gates and interfacing between TTL and CMOS gates.
12. Design a 4-bit shift-register and verify its operation . Verify the operation of a ring counter and a Johnson counter.
NOTE : At least ten experiments are to be performed, atleast seven experiments should be performed from above list. Remaining
three experiments may either be performed from the above list or designed & set by the concerned Department as per the scope of the
syllabus.
ECE-226 COMMUNICATION SYSTEMS LAB
L T P Credits Class Work : 25Marks
- - 2 2 Theory : 25 Marks
Total : 50 Marks
Duration of Exam. : 3 Hrs.
LIST OF EXPERIMENTS:
1. Study of Amplitude Modulation and determination of Modulation index.
2. Study of Frequency Modulation and determination of Modulation index.
3. Study of Phase Modulation.
4. Study of Pulse Amplitude Modulation.
5. Study of Pulse Width Modulation.
6. Study of Pulse Frequency Modulation.
7. Study of Pulse Code Modulation.
8. Study of frequency Shift Keying.
9. Study of ASK and QASK.
10. Study of PSK and QPSK.
11. Project related to the scope of the course.
NOTE: Atleast ten experiments are to be performed , atleast seven experiments should be performed from above list. Remaining three
experiments may either be performed from the above list or designed & set by the concerned Department as per the scope of the
syllabus.
MATH-204 NUMERICAL METHODS LAB.
(COMMON FOR EE,EL,CHE)
L T P Credit Class Work : 25Marks
- - 2 2 Theory : 25 Marks
Total : 50 Marks
Duration of Exam. : 3 Hrs.
WRITE DOWN AND EXECUTE THE FOLLOWING PROGRAMS USING C++/MATLAB
1. To find the roots of non-linear equation using Bisection method.
2. To find the roots of non-linear equation using Newton's method.
3. Curve fitting by least - square approximations.
4. To solve the system of linear equations using Gauss- Elimination method.
5. To solve the system of linear equations using Gauss-Seidal iteration method.
6. To solve the system of linear equations using Gauss-Jorden method.
7. To Integrate numerically using Trapezoidal rule.
8. To Integrate numerically using Simpson's rules.
9. To find the largest eigen value of a matrix by power-method.
10. To find numerical solution of ordinary differential equations by Euler's method.
11. To find numerical solution of ordinary differential equations by Runge-Kutta method.
12. To find numerical solution of ordinary differential equations by Milne's method.
13. To find the numerical solution of Laplace equation.
14. To find numerical solution of wave equation.
15. To find numerical solution of heat equation.
BOOKS SUGGESTED :
1. Applied Numerical Analysis by Curtis F. Gerald and Patrick
G. Wheatley-Pearson, Education Ltd.
2. Numerical Methods : E. Balagurusamy T.M.H.
Note: Ten experiments are to be performed out of which at least seven experiments should be performed from above list.
Remaining three experiments may either be performed fromthe above list or designed by the concerned Department as
per the scope of the syllabus.
GPEC202 GENERAL PROFICIENCY
B. Tech Semester –IV (Electronics & Communication Engineering)
L T P Credits Class Work : 50 Marks
- - - 2
The purpose of this course is to inculcate a sense of professionalism in a student along with personality development in terms
of quality such as receiving, responding, temperament, attitude and outlook. The student efforts will be evaluated on the basis
of his/ her performance / achievements in different walks of life.
The evaluation will be made by the panel of experts/ teachers, preferably interdisciplinary to be appointed by the Vice-
Chancellor of the University on recommendation of the Dean Academic Affairs. A Faculty Counselor will be attached to a
group of students which will remain associated with him /her during the entire period of the degree program in the University.
Each faculty member will serve as a faculty counselor. They will act like a local guardian for the students associated with him /
her and will help them in terms of career guidance, personal difficulties.
A. The student will present a written report before the committee with following in view:
The student will present before the committee his/her achievements during the current academic session in the form
Of a written report highlighting following:
I. Academic Performance --------
II. Extra Curricular Activities (4 Marks)
III Technical Activities (4 Marks)
IV Industrial, Educational tour (4 Marks)
V Sports/games (4 Marks)
VI Community Service, Hostel Activities (4 Marks)
NOTE: Report submitted by the students should be typed on both sides of the paper.
B. A student will support his/her achievement and verbal & communicative skill through presentation before the committee.
(20 Marks)
C. Faculty Counselor Assignment (10 Marks)
It will be the duty of the student to get evaluated by respective faculty counselor and to submit the counselor assessment marks in a
sealed envelop to the committee.
A counselor will assess the student which reflects his/her learning graph including followings:
1. Discipline throughout the year
2. Sincerity towards study
3. How quickly the student assimilates professional value system etc.
ECE-301 COMMUNICATION ENGINEERING
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
UNIT 1 SPECTRAL ANALYSIS :
Fourier Series, Fourier tranforms, Convolution Theorem, Correlation, Cross-Correlation and autocorrelation.
UNIT 2 INFORMATION THEORY :
Introduction to information and entropy, channel capacity for discrete and continuous channels, Shannon’s Theorem, Shannon-Hartley
Theorem, Noisy channels, coding theory : Shannon-Fano coding, minimum redundance coding, maximization of entropy of a
continuous message transmission rate, effect of medium on the information, selection of channels ,effect of noise and its minimization.
UNIT 3 RANDOM SIGNAL THEORY :
Representation of random signals, concept of probability, probability of joint occurrence, conditional probability, discrete probability
theory, continuous random variables, probability distribution function, probability density function, joint probability density functions.
Statistical average and moments, Ergodic processes, correlation function, power spectral density, central limit theory, response of
linear systemto randomsignals. Error function, regularity, covariance relation among the spectral densities of the two input-output
random processes. Cross spectral densities, optimum filters.
TEXT BOOK :
1. Principles of Communication Systems : Taub Schiling; TMH
REFERENCE BOOKS.
1. Communication Systems : Singh and Sapre ; TMH
2. Communication Systems : A Bruce Carlson; TMH
NOTE: Eight questions are to be set, at least two from each unit. Students have to attempt five questions in all.
ECE-303 ELECTRONIC MEASUREMENT AND INSTRUMENTATION
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
UNIT 1. OSCILLOSCOPE:
Block diagram, study of various stages in brief, high frequency CRO considerations. Sampling and storage oscilloscope.
UNIT 2. ELECTRONIC INSTRUMENTS:
Instruments for measurement of voltage, current & other circuit parameters, Q-meters, R.F. power measurements, introduction to
digital meters.
UNIT 3. GENERATION & ANALYSIS OF WAVEFORMS:
Block diagramof pulse generators, signal generators, function generators wave analysers, distortion analysers, spectrumanalyser,
Harmonic analyser, introduction to power analyser.
UNIT 4. FREQUENCY & TIME MEASUREMENT:
Study of decade counting Assembly(DCA), frequencymeasurements, periodmeasurements, universal counter, introduction to digital
meters.
UNIT 5. DISPLAY DEVICES:
Nixie tubes, LED’s LCD’s, discharge devices.
UNIT 6 TRANSDUCERS:
Classification, Transducers of types: RLC photocell, thermocouples etc. basic schemes of measurement of displacement, velocity,
acceleration, strain, pressure, liquid level & temperature.
UNIT 7 INTRODUCTION TO SIGNAL CONDITIONING:
DC signal conditioning system, AC signal conditioning system, data acquisition and conversion system
TEXT BOOK:
1. A course in Electrical & Electronics Measurements & Instrumentation: A.K.Sawhney; Dhanpat Rai & Sons.
REFERENCE BOOKS.
1. Electronics Instrumentation & Measurement Techniques : Cooper; PHI.
NOTE: Eight questions are to be set –at least one from each unit. Students have to attempt five questions in all.
ECE-305 ANALOG ELECTRONIC CIRCUITS
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
UNIT1. SINGLE AND MULTISTAGE AMPLIFIERS:
Classification of amplifiers, distortion in amplifiers, frequency response of an amplifier, step response of an amplifier, pass-band of
cascaded stages, RC-coupled amplifier, low frequency response of RC coupled stage, effect of an emitter bypass capacitor on low
Frequency response, multistage CE amplifier .
UNIT2. FEEDBACK AMPLIFIERS :
Feedback concept, transfer gain with feedback, general characteristics of negative feedback amplifiers, input resistance, output
resistance, voltage series feedback, current series feedback, current shunt feedback, voltage shunt feedback.
UNIT3. OSCILLATORS:
Sinusoidal oscillators, Barkhausen criteria, R-C phase shift oscillator, generalform of oscillator circuit, wien-bridge oscillator, crystal
oscillator.
UNIT4. POWER AMPLIFIERS:
Class A, B, and Coperations; Class Alarge signal amplifiers, higher order harmonic distortion, efficiency, transformer coupled power
amplifier, class B amplifier : efficiency & distortion; class A and class B push-pull amplifiers; class C power amplifier.
UNIT5. OPERATIONAL AMPLIFIERS :
Ideal and practical operational amplifiers, inverting and non-inverting amplifier, differential amplifier, emitter coupled differential
amplifier, transfer characteristics of a differential amplifier, offset error : voltage and current, common mode rejection ratio (CMRR) .
UNIT6. LINEAR APPLICATIONS OF OPERATIONAL AMPLIFIERS :
Scale changer, phase shifter, adder, voltage to current converter, current to voltage converter, DCvoltage follower, Bridge amplifier,
AC coupled amplifier, AC voltage follower, Integrator, differentiator.
UNIT7. NON-LINEAR APPLICATIONS OF OPERATIONAL AMPLIFIERS :
Comparators, sample & hold circuits, Logarithmic amplifier, anti-log amplifier, logarithmic multiplier, waveform generators , Miller &
Bootstrap sweep generators, regenerative comparator (Schmitt Trigger), multivibrators, ADC.
TEXT BOOK:
1. Integrated Electronics: Milman Halkias, TMH.
2. Microelectronic Circuits : Sedra & Smith.
REFERENCE BOOKS:
1. Operational Amplifiers:Gaikwad
2. Electronic Circuit Analysis and Design ( Second edition) : D.A.Neamen; TMH
NOTE: Eight questions are to be set –at least one from each unit. Students have to attempt five questions.
ECE-307 ANTENNA AND WAVE PROPOGATION
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
UNIT 1. RADIATION OF ELECTROMAGNETIC WAVES :
Retarded potential, field of short dipole, Antenna pattern & antenna parameters.
UNIT 2. ANTENNA PARAMETERS :
Antenna pattern, Gain, Directivity, Radiation resistance, Aperture, Beam-width etc, Reciprocity theorem for antenna.
UNIT 3. ELEMENTAL ANTENNA:
Wave equation for radiated fields fromcurrent and voltage sources in terms of electric scalar potential andmagnetic vector potential
.Fields and pattern of an infinitesimal dipole. Definition of various potentials used in antenna theory .
UNIT 4. PRACTICAL LINEAR ANTENNAS:
Relationbetweencurrent distribution andfieldpatternof an antenna, linear antenna, half wave dipole, Antennaimpedance, Directivity,
Radiation resistance, Directional properties, Effect of ground on antenna pattern, Input impedance Broad band matching. Mutual
impedance .
UNIT 5. ANTENNA ARRAYS :
Two element array, broad side, End fired pattern, Beamwidth patternmultiplication,multi element array and their properties, Synthesis
of an array.
UNIT 6. VARIOUS TYPES OF ANTENNA :
parabolic feeds, conical, helix, log periodic, horn, Microwave antenna .
UNIT 7. PROPAGATION :
Ground waves, Space waves, Effect of Earth, Duct formation, Ionosphere, and sky waves.
TEXT BOOKS : 1. Antennas by J.D.Kraus, TMH.
2. Antenna & Wave Propagation by K.D Prasad.
REF. BOOKS : 1.Antenna & Radiowave Propogation by Collin,TMH
2.Electromagnetic Waves & Radiating Systems by Jordan & Balman, PHI.
NOTE : Eight questions are to be set - at least one question from each unit. Students have to attempt five question in all.
CSE- 210 Computer Architecture & Organization
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
Unit-1: BasicPrinciples: Boolean algebra and Logic gates, Combinational logic blocks(Adders,Multiplexers, Encoders, de-coder), Sequential logic
blocks(Latches, Flip-Flops, Registers, Counters)
Unit-2: General System Architecture: Store program control concept, Flynn’s classification of computers (SISD, MISD, MIMD); Multilevel
viewpoint of a machine: digital logic, micro architecture, ISA, operating systems, high level language; structured organization; CPU, caches, main
memory, secondary memory units & I/O; Performance metrics; MIPS, MFLOPS.
Unit-3: Instruction Set Architecture: Instruction set based classification of processors (RISC, CISC, and their comparison); addressing modes:
register, immediate, direct, indirect, indexed; Operations in the instruction set; Arithmetic and Logical, Data Transfer, Control Flow; Instruction set
formats (fixed, variable, hybrid); Language of the machine: 8086 ; simulation using MSAM.
Unit-4: Basic non pipelined CPU Architecture: CPU Architecture types (accumulator, register, stack, memory/ register) detailed data path of a
typical register based CPU, Fetch-Decode-Execute cycle (typically 3 to 5 stage); microinstruction sequencing, implementation of control unit,
Enhancing performance with pipelining.
Unit-5: Memory Hierarchy & I/O Techniques: The need for a memory hierarchy (Locality of reference principle, Memory hierarchy in practice:
Cache, mainmemory and secondarymemory, Memory parameters: access/ cycle time, cost per bit); Mainmemory (Semiconductor RAM&ROM
organization, memory expansion, Static & dynamic memory types); Cache memory (Associative & direct mapped cache organizations.
Unit-6: Introduction to Parallelism: Goals of parallelism(Exploitation of concurrency, throughput enhancement); Amdahl’s law; Instruction level
parallelism (pipelining, super scaling –basic features); Processor level parallelism (Multiprocessor systems overview).
Unit-7: Computer Organization [80x86]: Instruction codes, computer register, computer instructions, timing and control, instruction cycle, type of
instructions, memory reference, register reference. I/Oreference, Basics of Logic Design, accumulator logic, Control memory, address sequencing,
micro-instruction formats, micro-program sequencer, Stack Organization, Instruction Formats, Types of interrupts; Memory Hierarchy.
Text Books:
Computer Organization and Design, 2nd Ed., by David A. Patterson and John L. Hennessy, Morgan 1997, Kauffmann.
Computer Architecture and Organization, 3rd Edi, by John P. Hayes, 1998, TMH.
Reference Books:
Operating Systems Internals and Design Principles by William Stallings,4th edition, 2001, Prentice-Hall Upper Saddle River,
New Jersey
Computer Organization, 5th Edi, by Carl Hamacher, Zvonko Vranesic,2002, Safwat Zaky.
Structured Computer Organisation by A.S. Tanenbaum, 4th edition, Prentice-Hall of India, 1999, Eastern Economic Edition.
Computer Organisation & Architecture: Designing for performance by W. Stallings, 4th edition, 1996, Prentice-Hall International
edition.
Computer System Architecture by M. Mano, 2001, Prentice-Hall.
Computer Architecture- Nicholas Carter, 2002, T.M.H.
Note: Eight questions will be set in all by the examiners taking at least one question from each unit. Students will be required to
attempt five questions in all.
ECE-309 MICROPROCESSORS AND INTERFACING
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
PART A
UNIT1. THE 8085 PROCESSOR :
Introduction to microprocessor, 8085 microprocessor : Architecture, instruction set, interrupt structure, and assembly language
programming.
UNIT2. THE 8086 MICROPROCESSOR ARCHITECTURE :
Architecture, block diagram of 8086, details of sub-blocks such as EU, BIU; memory segmentation and physical address
computations, program relocation, addressing modes, instruction formats, pin diagram and description of various signals.
UNIT3. INSTRUCTION SET OF 8086 :
Instruction execution timing, assembler instruction format, data transfer instructions, arithmetic instructions, branch instructions,
looping instructions, NOP and HLT instructions, flag manipulation instructions, logical instructions, shift and rotate instructions,
directives and operators, programming examples.
PART B
UNIT4. INTERFACING DEVICE :
The 8255 PPI chip: Architecture, control words, modes and examples.
UNIT 5. DMA :
Introduction to DMA process, 8237 DMA controller,
UNIT6. INTERRUPT AND TIMER :
8259 Programmable interrupt controller, Programmable interval timer chips.
TEXT BOOKS :
1. Microprocessor Architecture, Programming & Applications with 8085 : Ramesh S Gaonkar; Wiley Eastern Ltd.
2. The Intel Microprocessors 8086- Pentium processor : Brey; PHI
REFERENCE BOOKS:
1. Microprocessors and interfacing : Hall; TMH
2. The 8088 & 8086 Microprocessors-Programming, interfacing,Hardware & Applications :Triebel & Singh; PHI
3. Microcomputer systems: the 8086/8088 Family: architecture, Programming & Design : Yu-Chang Liu & Glenn A Gibson; PHI.
4. Advanced Microprocessors and Interfacing : Badri Ram; TMH
NOTE : 8 questions are to be set selecting FIVE questions from PART A and THREE questions from PART B. Students have to
attempt any five questions.
ECE-323 ELECTRONIC MEASUREMENT AND INSTRUMENTATION-LAB
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 HRS
LIST OF EXPERIMENTS:
1. Measurement of displacement using LVDT.
2. Measurement of distance using LDR.
3. Measurement of temperature using R.T.D.
4. Measurement of temperature using Thermocouple.
5. Measurement of pressure using Strain Guage.
6. Measurement of pressure using Piezo-Electric Pick up.
7. Measurement of distance using Capacitive Pick up.
8. Measurement of distance using Inductive Pick up.
9. Measurement of speed of DC Motor using Magnetic Pick up.
10. Measurement of speed of DC Motor using Photo Electric Pick up.
NOTE :
1. At least ten experiments have to be performed in the semester.
2. At least seven experiments should be performed from above list. Remaining three experiments may either be performed from
the above list or designed & set by the concerned Department as per the scope of the syllabus of EE-303-C.
ECE-325 ANALOG ELECTRONIC CIRCUITS LAB
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 HRS
LIST OF EXPERIMENTS:
1. Design & measure the frequency response of an RC coupled amplifier using discrete components.
2. Design a two stage RC coupled amplifier and determine the effect of cascading on gain and bandwidth
3.
Study the effect of voltage series, current series, voltage shunt, and current shunt feed-back on amplifier using discrete
components.
4. Design & realize inverting amplifier, non-inverting and buffer amplifier using 741 Op Amp.
5. Verify the operation of a differentiator circuit using 741 op amp and show that it acts as a high pass filter.
6. Verify the operation of a integrator circuit using 741 op amp and show that it acts as a low pass filter.
7. Design and verify the operations of op amp adder and subtractor circuits.
8. Plot frequency response of AC coupled amplifier using op amp 741 and study the effect of negative feedback on the
bandwidth and gain of the amplifier.
9. Design & realize using op amp 741, Wein -bridge oscillator.
10. To design & realize using op amp 741, square wave generator.
11. To design & realize using op amp 741, logarithmic amplifier & VCCS.
NOTE: At least ten experiments are to be performed. Seven experiments should be performed fromthe above list and the remaining
three experiments can be either from the above list or set by the concerned Department as per the scope of the syllabus of EE-305-C.
ECE-329 MICROPROCESSORS AND INTERFACING LAB
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 HRS
LIST OF EXPERIMENTS:
1. Study of 8085 Microprocessor kit.
2. Write a program using 8085 and verify for :
a. Addition of two 8-bit numbers.
b. Addition of two 8-bit numbers (with carry).
3. Write a program using 8085 and verify for :
a. 8-bit subtraction (display borrow)
b. 16-bit subtraction (display borrow)
4. Write a programusing 8085formultiplication of two 8- bit numbers by repeated additionmethod. Check for minimumnumber
of additions and test for typical data.
5. Write a program using 8085 for multiplication of two 8- bit numbers by bit rotation method and verify.
6. Write a program using 8085 for division of two 8- bit numbers by repeated subtraction method and test for typical data.
7. Write a program using 8085 for dividing two 8- bit numbers by bit rotation method and test for typical data.
8. Study of 8086 microprocessor kit
9. Write a program using 8086 for division of a defined double word (stored in a data segment) by another double Word division
and verify.
10. Write a program using 8086 for finding the square root of a given number and verify.
11. Write a program using 8086 for copying 12 bytes of data from source to destination and verify.
12. Write a program using 8086 and verify for:
a. Finding the largest number from an array.
b. Finding the smallest number from an array.
13. Write a program using 8086 for arranging an array of numbers in descending order and verify.
14. Write a program using 8086 for arranging an array of numbers in ascending order and verify.
15. Write a program for finding square of a number using look-up table and verify.
16. Write a program to interface a two digit number using seven-segment LEDs. Use 8085/8086 microprocessor and 8255 PPI.
17. Write a program to control the operation of stepper motor using 8085/8086 microprocessor and 8255 PPI.
NOTE: At least ten experiments have to be performed in the semester out of which seven experiments should be performed from
abovelist. Remainingthree experimentsmay either be performedfromthe abovelist or designed &set by the concerned Department
as per the scope of the syllabus of EE-309-C.
ECE-331 ELECTRONICS CIRCUIT SIMULATION LAB
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 HRS
LIST OF EXPERIMENTS:
1. Simulate and study half-wave, full-wave, and bridge-rectifier using PSPICE windows
2. Simulate and study diode clipper and clamper circuits using PSPICE windows
3. Simulate and study emitter bias and fixed bias BJT and JFET circuits using PSPICE windows, and determine quiescent
conditions.
4. Simulate a common emitter amplifier using self biasing and study the effect of variation in emitter resistor on voltage gain ,
input and output impedance using PSPICE windows .
5. Determine the frequency response of Vo/Vs for CE BJT amplifier using PSPICE windows. Study the effect of cascading of two
stages on band width.
6. Simulate and study Darlington pair amplifier circuit using PSPICE windows and determine dc bias and output ac voltage .
7. Study an operational amplifier using PSPICE windows and find out: CMMR, gain band width product, slew rate, 3-db
frequency, and input offset voltage.
8. Simulate and study active low pass, high pass, and band pass filters using PSPICE windows.
9. Simulate and study class A, B, C, and AB amplifier using PSPICE windows.
10. Study the operation of 555 timer oscillator using PSPICE.
11. Simulate logic expression………………..and determine its truth table.
12. Simulate logic expression of full adder circuit and determine its truth table.
13. Simulate a synchronous 4-bit counter and determine its count sequence.
14. Simulate a master-slave flip-flop using NAND gates and study its operation. Study the operation of asynchronous preset and
clear .
NOTE : At least ten experiments have to be performed in the semester; out of which at least seven experiments should be performed
from above list. Remaining three experiments may either be performed from the above list or designed & set by the concerned
Department.
ECE-335 PROFESSIONAL TRAINING - I
B. Tech Semester –V (Electronics & Communication. Engg)
L T P Credits Class Work : 50 Marks
- - 2 2 Total : 50 Marks
At the end of 4th semester each student would undergo four weeks Professional Training in an Industry/ Institute/ Professional
Organization/ Research Laboratory etc. with the prior approval of the Training andPlacement Officer of theUniversity and submit
in the department a typed report along with a certificate from the organization.
The typed report should be in a prescribed format.
The report will be evaluated in the V Semester by a Committee consisting of three teachers fromdifferent specialization to be
constituted by the Chairperson of the department. The basis of evaluation will primarily be the knowledge and exposure of the
student towards different processes and the functioning of the organization.
The student will interact with the committee through presentation to demonstrate his/her learning.
Teachers associated with evaluation work will be assigned 2 periods per week load.
ECE-302 MICROWAVE AND RADAR ENGINEERING
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT1. WAVEGUIDES:
Introduction, comparison with transmission lines, propagation in TE & TMmode, rectangular wave guide, TEMmode in rectangular
wave guide, characteristic impedance, introduction to circular waveguides and planar transmission lines.
UNIT2 . MICROWAVE COMPONENTS:
Directional couplers, tees, hybrid ring, S-parameters, attenuators, cavity resonators ,mixers &detectors, matched Load, phase shifter
,wave meter, Ferrite devices: Isolators, circulators.
UNIT3. MICROWAVE TUBES:
Limitation of conventional tubes; Construction, operation and properties of Klystron amplifier, reflexKlystron,magnetron, TWT, BWO,
crossed field amplifiers.
UNIT4. MICROWAVE SOLID STATE DEVICES :
Varactor diode, Tunnel diode, Schottky diode, GUNN diode, IMPATT, TRAPATT and PIN diodes. MASER, parametric amplifiers.
UNIT5. MICROWAVE MEASUREMENTS :
Power measurement using calorimeter & bolometers, measurement of SWR, frequency , wavelength and impedance. Microwave
bridges.
UNIT6. INTRODUCTION TO RADAR :
BlockDiagramand operation, Radar Frequencies, Simple formof Radar Equation, Prediction of RangePerformance, PulseRepetition
frequency and Range Ambiguities, Applications of Radar
TEXT BOOKS:
1. Microwave devices and circuits :Samuel Liao;PHI
2. Microwave devices & Radar Engg :M .Kulkarni;Umesh
REFERENCE BOOK :
1. Microwaves and Radar : A.K. Maini; Khanna
NOTE : Eight questions are to be set –atleast one from each unit. Students have to attempt any five questions
EE-304 CONTROL SYSTEM ENGINEERING
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT1. INTRODUCTORY CONCEPTS :
System/Plant model, types of models, illustrative examples of plants and their inputs and outputs, controller, servomechanism,
regulating system, linear time-invariant (LTI) system, time-varying system, causal system, open loop control system, closed loop
control system, illustrative examples of open-loop and feedback control systems, continuous time and sampled data control systems.
Effects of feedback on sensitivity (to parameter variations), stability, external disturbance (noise), overall gain etc. Introductory
remarks about non-linear control systems.
UNIT2. MATHEMATICAL MODELLING :
Concept of transfer function, relationship between transfer function and impulse response, order of a system, block diagramalgebra,
signal flow graphs : Mason’s gain formula & its application, characteristic equation, derivation of transfer functions of electrical and
electromechanical systems. Transfer functions of cascaded and non-loading cascaded elements. Introduction to state variable
analysis and design.
UNIT3. TIME DOMAIN ANALYSIS:
Typical test signals, time response of first order systems to various standard inputs, time response of 2nd order systemto step input,
relationship between location of roots of characteristics equation, w and wn, time domain specifications of a general and an underdamped
2nd order system, steady state error and error constants, dominant closed loop poles, concept of stability, pole zero
configuration and stability, necessary and sufficient conditions for stability, Hurwitz stability criterion, Routh stability criterion and
relative stability.
UNIT4. ROOT LOCUS TECHNIQUE:
Root locus concept, development of root loci for various systems, stability considerations.
UNIT5. FREQUENCY DOMAIN ANALYSIS:
Relationship between frequency response and time-response for 2nd order system, polar, Nyquist, Bode plots, stability, Gain-margin
and Phase Margin, relative stability, frequency response specifications.
UNIT6. COMPENSATION:
Necessity of compensation, compensation networks, application of lag and lead compensation, basic modes of feedback control,
proportional, integral and derivative controllers, illustrative examples.
UNIT7. CONTROL COMPONENTS : Synchros, AC and DC techo-generators, servomotors, stepper motors, & their applications,
magnetic amplifier.
TEXT BOOK :
1. Control System Engineering : I.J.Nagrath & M.Gopal; New Age
REFERENCE BOOKS :
1. Automatic Control Systems : B.C.Kuo, PHI.
2. Modern Control Engg : K.Ogata; PHI.
3. Control Systems - Principles & Design : Madan Gopal; Tata Mc Graw Hill.
4. Modern Control Engineering.R.C.Dorl & Bishop; Addison-Wesley
NOTE: Eight questions are to be set - at least one from each unit. Students have to attempt five questions.
ECE-306 MOS IC’S AND TECHNOLOGY
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT1. REVIEW OF MOS TECHNOLOGY :
Introduction to ICtechnology, MOS Transistor enhancement mode and depletionmode operations, fabrication of NMOS, CMOS and
BiCMOS devices. Equivalent circuit for MOSFET and CMOS.
UNIT2. MOS TRANSISTOR THEORY:
MOS device design equations, MOS transistor, Evaluation aspects of MOS transistor, threshold voltage, MOS transistor
transconductance & output conductance, figure of merit, determination of pull-up to pull-down ratio for an n-MOS inverter driven by
another n-MOS inverter & by one or more pass transistor, alternative forms of pull-up, CMOS and BiCMOS-inverters. Latch up in
CMOS circuitry and BiCMOS Latch up susceptibility.
UNIT3. MOS CIRCUITS AND LOGIC DESIGN :
Basic physical design of simple logic gates using n-MOS, p-MOS and CMOS, CMOS logic gate design considerations, CMOS logic
structures, clocking strategies.
UNIT4. CIRCUIT CHARACTERIZATION AND PERFORMANCE ESTIMATION :
Resistance estimation, capacitance estimation, inductance, switching characteristics, CMOS gate transistor sizing, power dissipation.
UNIT5. VLSI FABRICATION :
Crystal growth, wafer preparation, epitaxy, oxidation, lithography, etching, diffusion, dielectric and poly-silicon film deposition, ion
implantation, yield and reliability, metalization.
UNIT6. DESIGN EXAMPLE USING CMOS :
Incrementer / decrementer, left/right shift serial/parallel register, comparator for two n-bit number, a two-phase non-overlapping clock
generator with buffered output on both phases, design of an event driven element for EDL system
TEXT BOOKS :
1. Introduction to Digital Integrated Circuits : Rabaey,Chandrakasan & Nikolic.
2. Principles of CMOS VLSI Design : Neil H.E. Weste and Kamran Eshraghian; Pearson.
REFERENCE BOOKS :
1. Introduction to Digital Circuits : Rabaey and ……..LPE (PH)
2. …………………………………: S.K.Gandhi.
3. VLSI Technology: S.M. Sze; McGraw-Hill.
4. Integrated Circuits: K.R. Botkar; Khanna
NOTE: Eight questions are to be set –atleast one from each unit. Students have to attempt any five questions
CSE-306 COMPUTER NETWORKS
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
Unit-1: OSI Reference Model and Network Architecture: Introduction to Computer Networks, Example networks ARPANET,
Internet, Private Networks, Network Topologies: Bus-, Star-, Ring-, Hybrid -, Tree -, Complete -, Irregular –Topology; Types of
Networks : Local Area Networks, Metropolitan Area Networks, Wide Area Networks; Layering architecture of networks, OSI model,
Functions of each layer, Services and Protocols of each layer
Unit–2: TCP/IP: Introduction, History of TCP/IP, Layers of TCP/IP, Protocols, Internet Protocol, Transmission Control Protocol , User
DatagramProtocol, IPAddressing, IPaddress classes, Subnet Addressing, Internet Control Protocols, ARP, RARP, ICMP, Application
Layer, Domain Name System, Email –SMTP, POP,IMAP; FTP, NNTP, HTTP, Overview of IP version 6.
Unit-3: Local AreaNetworks: Introduction to LANs, Features of LANs, Components of LANs, Usage of LANs, LANStandards, IEEE
802 standards, Channel AccessMethods, Aloha, CSMA, CSMA/CD, Token Passing, Ethernet, Layer 2 & 3 switching, Fast Ethernet
and Gigabit Ethernet, Token Ring, LAN interconnecting devices: Hubs, Switches, Bridges, Routers, Gateways.
Unit–4: Wide Area Networks: Introduction ofWANs, Routing, Congestion Control,WANTechnologies, DistributedQueue Dual Bus
(DQDB), Synchronous Digital Hierarchy (SDH)/ Synchronous Optical Network (SONET), Asynchronous Transfer Mode (ATM), Frame
Relay.,Wireless Links.
Unit-5: Introduction toNetworkManagement: RemoteMonitoring Techniques: Polling, Traps, PerformanceManagement, Class of
Service, Quality of Service, Security management, Firewalls, VLANs, Proxy Servers, Introduction to Network Operating Systems:
Client-Server infrastructure, Windows NT/2000.
Text Book:
Computer Networks (3rd edition), Tanenbaum Andrew S., International edition, 1996.
Reference Books:
Data Communications, Computer Networks and Open Systems (4th edition), Halsall Fred,
2000, Addison Wesley, Low Price Edition.
Business Data Communications, Fitzgerald Jerry,.
Computer Networks –A System Approach, Larry L. Peterson & Bruce S. Davie, 2nd Edition
Computer Networking –ED Tittel , 2002, T.M.H.
Note: Eight questions will be set in all by the examiners taking at least one question from each unit. Students will be
required to attempt five questions in all.
ECE-308 SIGNALS AND SYSTEMS
L T P Credits Marks
3 1 - 4 Exams: 100
Sessionals : 50
Total : 150
Duration of Exam.: 3 hrs.
Unit-I : Signals and Systems
Continuous-time and discrete-time Signals, Transformations of the Independent Variable, Exponential and Sinusoidal Signals,
Continuous-Time and Discrete-Time LTI Systems and their properties, convolution sum and convolution integrals, LTI System
described by differential and difference equation.
Unit-II : Fourier Series and Fourier Transform
The response of LTI Systems to Complex Exponentials, Fourier Series, Representation of Continuous-time Periodic Signals and
their Properties, Continuous time and discrete time Fourier Transforms and their properties, System Characterized by Linear
Constant Coefficient Differential equations and Difference equation.
Unit-III : Time and Frequency Characterization of Signals and Systems
Magnitude Phase Representation of the Fourier Transform, Magnitude Phase, Representation of the Frequency response of LTI
systems, Time domain Properties of Ideal Frequency Selective filter, Time Domain and Frequency Domain aspects of Non ideal
filters, First Order and Second Order Continuous Time and Discrete time Systems.
Unit-IV : Sampling and Laplace Transform
Signal representation by samples, sampling theorem, Impulse train sampling, sampling of discrete time signals, discrete time
processing of continuous time signals. Laplace Transform, Region of convergence, inverse Laplace Transform, Analysis and
characterization of LTI System, Block diagramrepresentation, Unilateral Laplace transform, Bilateral LT, Regions of convergence
(ROC).
Unit-V : Z-Transform
Z-Transform, Region of convergence, Inverse Z-transform, analysis and characterization of LTI system, Block diagram
representation, Unilateral Z-transform.
Text Book
1. V. Oppenheim, A.S. Willsky and S. Hamid Nawab, ‘signals & System’, PEARSON Education, Second Edition, 2003.
Reference Book
1. Roberts, “Signals and Systems” TATA McGraw Hills.
2. P. Ramesh Babu, R. Ananda Natarajan, .”Signals and Systems”, SCITECH Publications.
3. Charles L. Phillips, John M.PARR and EVEA. RISKIN, “Signals, Systems and Transforms”, PEARSON Education, Third Edition.
4. Chen ‘Signals & Systems, Oxford University, Press.
Note: Eight questions will be set in all by the examiners taking at least one question fromeach unit. Students will be required to
attempt five questions in all.
ECE-310 DIGITAL SYSTEM DESIGN
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT 1. INTRODUCTION :
Introduction toComputer-aided design tools for digital systems. Hardware description languages; introduction toVHDL, data objects,
classes and data types, Operators, Overloading, logical operators.Types of delays Entity and Architecture declaration. Introduction to
behavioural, dataflow and structural models.
UNIT 2. VHDL STATEMENTS :
Assignment statements, sequential statements and process, conditional statements, case statement Array and loops, resolution
functions, Packages and Libraries, concurrent statements.
Subprograms: Application of Functions and Procedures, Structural Modelling, component declaration, structural layout and generics.
UNIT 3. COMBINATIONAL CIRCUIT DESIGN:
VHDL Models and Simulation of combinational circuits such as Multiplexers, Demultiplexers, encoders, decoders, code converters,
comparators, implementation of Boolean functions etc.
UNIT 4. SEQUENTIAL CIRCUITS DESIGN :
VHDL Models and Simulation of Sequential Circuits Shift Registers, Counters etc.
UNIT 5. DESIGN OF MICROCOMPUTER :
Basic components of a computer, specifications, architecture of a simple microcomputer system, implementation of a simple
microcomputer system using VHDL
UNIT 6. DESIGN WITH CPLDs AND FPGAs :
Progr ammable logic devices : ROM, PLAs, PALs, GAL, PEEL, CPLDs and FPGA. Design implementation using CPLDs and FPGAs
REFERENCE BOOKS:
1. IEEE Standard VHDL Language Reference Manual (1993).
2. Digital Design and Modelling with VHDL and Synthesis : KC Chang; IEEE
Computer Society Press.
3. "A VHDL Primmer” : Bhasker; Prentice Hall 1995.
4. “Digital System Design using VHDL” : Charles. H.Roth ; PWS (1998).
5. "VHDL-Analysis & Modelling of Digital Systems” : Navabi Z; McGraw Hill.
6. VHDL-IV Edition :Perry; TMH (2002)
7. ”Introduction to Digital Systems” : Ercegovac. Lang & Moreno; John Wiley
(1999).
8. Fundamentals of Digital Logic with VHDL Design : Brown and Vranesic; TMH
(2000)
9. Modern Digital Electronics- III Edition: R.P Jain; TMH (2003).
NOTE : Eight questions are to be set - at least one question from each unit. Students will be required to attempt five questions in
all.
EE-324 CONTROL SYSTEM ENGG. LAB
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 Hrs
LIST OF EXPERIMENTS :
1. To study A.C. servo motor and to plot its torque speed characteristics.
2. To study D.C. servo motor and to plot its torque speed characteristics.
3. To study the magnetic amplifier and to plot its load current v/s control current characteristics for :
(a) series connected mode
(b) parallel connected mode.
4. To plot the load current v/s control current characteristics for self exited mode of the magnetic amplifier.
5. To study the synchro & to:
(a) Use the synchro pair (synchro transmitter & control transformer) as an error detector.
(b)Plot stator voltage v/s rotor angle for synchro transmitter i.e. to use the synchro transmitter as position transducer.
6. To use the synchro pair (synchro transmitter & synchro motor) as a torque transmitter.
7. (a) To demonstrate simple motor driven closed loop position control system.
(b) To study and demonstrate simple closed loop speed control system.
8. To study the lead, lag, lead-lag compensators and to draw their magnitude and phase plots.
9. To study a stepper motor & to execute microprocessor or computer-based control of the same by changing number of steps,
direction of rotation & speed.
10. To implement a PID controller for level control of a pilot plant.
11. To implement a PID controller for temperature control of a pilot plant.
12. To study the MATLAB package for simulation of control system design.
NOTE: At least ten experiments have to be performed in the semester, at least seven experiments should be performed fromabove
list. Remaining three experimentsmay either be performed fromthe above list or designed&set by the concerned Department as per
the scope of the syllabus of EE-304-C.
CSE-312 NETWORK PROGRAMMING LAB.
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 Hrs
The socket programming can be done on Unix/Linux operating or/and Windows. Socket programming, and the language can be
C/VC++ and/or Java
1. Write a program to Create Sockets For Sending And Receiving Data.
2. Write a program to Obtain The Local & Remote Socket Address.
3. Write a program to Create Sockets For Handling Multiple Connection
4. Write a program to Obtain The Information About The (A) Host (B) Network (C) Protocols (D) Domains
5. Write a program to Manipulate The IP Address.
6. Write a program to Write A Telnet Client.
7. Write a program to Make An FTP Client
Note: At least 5 to 10 more exercises to be given by the teacher concerned.
ECE-330 DIGITAL SYSTEM DESIGN LAB
L T P Credits Class Work : 25
- - 3 3 Exam : 25
Total : 50
Duration of Exam : 3 Hrs
LIST OF EXPERIMENTS:
1. Design all gates using VHDL.
2. Write VHDL programs for the following circuits, check the wave forms and the
hardware generated
a. half adder
b. full adder
3. Write VHDL programs for the following circuits, check the wave forms and the
hardware generated
a. multiplexer
b. demultiplexer
4. Write VHDL programs for the following circuits, check the wave forms and the
hardware generated
a. decoder
b. encoder
5. Write a VHDL program for a comparator and check the wave forms and the
hardware generated
6 Write a VHDL program for a code converter and check the wave forms and the
hardware generated
7. Write a VHDL program for a FLIP-FLOP and check the wave forms and the
hardware generated
8. Write a VHDL program for a counter and check the wave forms and the hardware
generated
9. Write VHDL programs for the following circuits, check the wave forms and the
hardware generated
a. register
b. shift register
10. Implement any three (given above) on FPGA/CPLD kit
NOTE: Ten experiments are to be performed out of which at least seven experiments should be performed fromabove list. Remaining
three experiments may either be performed from the above list or designed & set by the concerned Department as per the scope
of the syllabus.
ECE-322 MICROWAVE LAB
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 Hrs
LIST OF EXPERIMENTS :
1. Study of wave guide components.
2. To study the characteristics of reflex Klystron and determine its timing range.
3. To measure frequency of microwave source and demonstrate relationship among guide dimensions, free space wave length
and guide wavelength.
4. To measure VSWR of unknown load and determine its impedance using a smith chart.
5. To match impedance for maximum power transfer using slide screw tuner.
6. To measure VSWR, insertion losses and attenuation of a fixed and variable attenuator.
7. To measure coupling and directivity of direction couplers.
8. To measure insertion loss, isolation of a three port circulator.
9. To measure the Q of a resonant cavity.
10. To study the V-I characteristics of GUNN diode.
NOTE : Ten experiments have to be performed in the semester. At least seven experiments should be performed fromabove list.
Remaining three experimentsmay either be performed fromthe above list or designed &set by the concerned Department as per the
scope of the syllabus of EE-302-C.
GPEC-302 GENERAL PROFICIENCY
B. Tech Semester –VI (Electronics & Communication Engineering)
L T P Credits Class Work : 50 Marks
- - - 2
The purpose of this course is to inculcate a sense of professionalismin a student alongwith personality development in terms
of quality such as receiving, responding, temperament, attitude and outlook. The student effortswill be evaluated on the basis
of his/ her performance / achievements in different walks of life.
The evaluation will be made by the panel of experts/ teachers, preferably interdisciplinary to be appointed by the Vice-
Chancellor of the University on recommendation of the Dean Academic Affairs. A Faculty Counselor will be attached to a
group of studentswhichwill remain associatedwith him/her during the entire period of the degree programin theUniversity.
Each faculty member will serve as a faculty counselor. They will act like a local guardian for the students associated with him /
her and will help them in terms of career guidance, personal difficulties.
A. The student will present a written report before the committee with following in view:
The student will present before the committee his/her achievements during the current academic session in the form of a written report
highlighting followings:
I. Academic Performance --------
II. Extra Curricular Activities (4 Marks)
III Technical Activities (4 Marks)
IV Industrial, Educational tour (4 Marks)
V Sports/games (4 Marks)
VI Community Service, Hostel Activities (4 Marks)
NOTE: Report submitted by the students should be typed on both sides of the paper.
B. A student will support his/her achievement and verbal & communicative skill through presentation before the committee.
(20 Marks)
C. Faculty Counselor Assignment (10 Marks)
It will be the duty of the student to get evaluated by respective faculty counselor and to submit the counselor assessment marks in a
sealed envelop to the committee.
A counselor will assess the student which reflects his/her learning graph including followings:
1. Discipline throughout the year
2. Sincerity towards study
3. How quickly the student assimilates professional value system etc.
ECE-401 DATA COMMUNICATION
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
UNIT 1 DIGITAL COMMUNICATION :
Introduction, digital communication, Shannon limit for information capacity, digital radio, digital amplitude modulation, frequency shift keying (FSK),
phase shift keying (PSK), quadrature amplitude modulation (QAM), band width efficiency, carrier recovery, differential phase shift keying,(DPSK),
clock recovery, probability of error & bit error rate, trellis encoding.
UNIT 2 DATA COMMUNICATIONS:
Introduction, history of data communication, standard organization for data communication, data communication circuits, data
communication codes, error control, synchronization, data communications hardware, serial interfaces: RS-232, RS-449 & RS-530,
CCITTX.21, parallel interfaces: centronics parallel interfaces. the telephone network: DDDnetwork, private- line service, the telephone
circuit, data modems: synchronous modems, asynchronous modems, modem synchronization.
UNIT 3 DATA COMMUNICATIONS PROTOCOLS AND NETWORK CONFIGURATIONS :
Introduction, open system interconnection (OSI), data transmission mode, asynchronous protocols, synchronous protocols, public data network,
integrated services digital network (ISDN), local area networks, token pass ring, Ethernet.
UNIT 4 MULTIPLEXING :
Introduction, time divisionmultiplexing, T1 digital carrier system, CCITT time divisionmultiplexed carrier systems, CODECS, COMBO
chips, line encoding, T-CARRIERS, frame synchronization, bit interleaving VS word interleaving, frequency division multiplexing,
AT&T’s FDM hierarchy, composite base band signal, formation of a master group.
UNIT 5 INTERNET AND TCP/IP:
Introduction, history, use of Internet, accessing the Internet, Internet addresses, security on the internet, authentication, firewalls,
intranet and extranet, TCP/IP reference model, domain name service, world wide web.
TEXT BOOK:
1. Electronic Communications Systems (4th Ed.) : Wayne Tomasi; Pearson
2. Data Communication and Networking (2nd -edition): Forauzan;
NOTE: Eight questions are to be set at-least one from each unit. Students have to attempt any five questions
ECE-403 EMBEDDED SYSTEMSDESIGN
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
UNIT 1 : INTRODUCTION
Different typesofmicrocontrollers: Embeddedmicrocontrollers, Externalmemorymicrocontrollers; ProcessorArchitectures: HarvardV/S
Princeton , CISC V/S RISC; microcontrollers memory types; microcontrollers features : clocking, i/o pins, interrupts, timers, peripherals.
UNIT 2 : MICROCONTROLLER ARCHITECTURE
Introduction to PIC microcontrollers, Architecture and pipelining, programmemory considerations, Addressing modes, CPU registers,
Instruction set, simple operations.
UNIT 3 : INTERRUPTS AND I/O PORTS
Interrupt logic, Timer2 scalar initialization, IntService Interrupt service routine, loop time subroutine, External interrupts and timers,
Synchronous serial port module, Serial peripheral device, O/p port Expansion, I/p port expansion, UART.
UNIT 4 : SOFTWARE
Development tools/ environments, Assembly language programming style, Interpreters, High level languages, Intel hex format object
files, Debugging.
UNIT 5 : PROGRAMMING WITH MICROCONTROLLERS
Arithmetic operations, Bit addressing, Loop control, Stack operation, Subroutines, RAMdirect addressing, statemachines, Oscillators,
Timer Interrupts, Memory mapped I/O.
UNIT 6 : DESINING USING MICROCONTROLLERS
Music box, Mouse wheel turning, PWMmotor control, Aircraft Demonstration, ultra sonic distance measuring, Temperature Sensor,
Pressure Sensor, Magnetic Field Sensor.
TEXT BOOK:
1. Design with PIC Microcontrollers by John B. Peatman , Pearson.
REFERENCE BOOKS :
1. Programming and Customizing the 8051 Microcontroller : Predko ; TMH.
2. Designing Embedded Hardware : John Catsoulis ;SHROFF PUB. & DISTR. ND.
3. Programming Embedded Systems in C and C++ : Michael Barr; SHROFF PUB. & DISTR. ND.
NOTE: Eight questions are to be set at-least one from each unit. Students have to attempt any five questions
ECE-405 OPTICAL COMMUNICATION SYSTEMS
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
UNIT1 INTRODUCTION TO OPTICAL COMMUNICATION SYSTEMS :
Electromagnetic spectrumused for optical communication, block diagramof optical communication system. Basics of transmission of
light rays. Advantages of optical fiber communication.
UNIT2 OPTICAL FIBERS:
Optical fibers structures and their types, fiber characteristics : attenuation, scattering, absorption, fiber bend loss, dispersion; fiber
couplers and connectors
UNIT3. LED LIGHT SOURCE :
Light emitting diode : recombination processes, the spectrum of recombination radiation, LED characteristics, internal quantum
efficiency, external quantum efficiency, LED structure, lens coupling to fiber, behavior at high frequencies.
UNIT4. LASER LIGHT SOURCE :
Basic principles of laser action in semi -conductors, optical gain, lasing threshold, laser structures and characteristics, laser to fiber
coupling, comparison with LED source.
UNIT5 . AVALANCHE AND PIN PHOTODETECTORS:
Principles of optical detection, quantumefficiency, responsivity, general principles of PINphotodetector, intrinsic absorption, materials
and designs for PIN photodiodes, impulse and frequency response of PIN photodiodes, noise in PIN Photodiodes, multiplication
process, APD Design, APD bandwidth, APD noise.
TEXT BOOK:
Optical Fiber Communications: John M Senior; PHI.
REFERENCE BOOKS :
1. Optical Communication Systems : John Gowar; PHI.
2. Optical Fiber Communications : Gerd Keiser; TMH
3. Optical fiber Communication : Selvarajan, Kar, Srinivas; TMH.
NOTE: Eight questions are to be set at least one question from each unit. Students have to attempt five question in all.
ECE-407 DIGITAL SIGNAL PROCESSING
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 HRS
UNIT1. DISCRETE-TIME SIGNALS:
Signal classifications, frequency domain representation, time domain representation, representation of sequences by Fourier transform,
properties of Fourier transform, discrete time random signals, energy and power theorems.
UNIT2. DISCRETE-TIMESYSTEMS: Classification, properties, time invariant system, finite impulseResponse (FIR) system, infinite
impulse response (IIR) system.
UNIT3. SAMPLING OF TIME SIGNALS:
Sampling theorem, application, frequency domain representation of sampling, reconstruction of band limited signal fromits samples.
discrete time processing of continuous time signals, changing the sampling rate using discrete time processing.
UNIT4. Z-TRANSFORM :
Introduction, properties of the region of convergence, properties of the Z-transform, inversion of the Z-transform, applications of Ztransform.
UNIT5. BASICSOF DIGITAL FILTERS : Fundamentals of digital filtering, various types of digital filters, design techniques of digital
filters : windowtechnique for FIR, bi-linear transformation and backward differencemethods for IIRfilter design, analysis of finiteword
length effects in DSP, DSP algorithm implementation consideration. Applications of DSP.
UNIT6. MULTIRATE DIGITAL SIGNAL PROCESSING:
Introduction to multirate digital signal processing, sampling rate conversion, filter structures, multistage decimator and interpolators,
digital filter banks.
TEXT BOOKS :
1. Digital Signal Processing : Proakis and Manolakis; PHI
2. Digital Signal Processing: Salivahanan, Vallavaraj and Gnanapriya;TMH
REFERENCE BOOKS:
1. Digital Signal Processing: Alon V. Oppenhelm;PHI
2. Digital Signal processing(II-Edition): Mitra, TMH
NOTE: Eight questions are to be set - at least one from each unit. Students have to attempt five questions.
ECE-421 DATA COMMUNICATION LAB
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 HRS
LIST OF EXPERIMENTS:
1) To study different types of transmission media
2) To study Quadrature Phase Shift Keying Modulation.
3) To study Quadrature Amplitude Modulation.
4) To Study !6 Quadrature Amplitude Multiplexing.
5) To Study Serial Interface RS-232 and its applications.
6) To study the Parallel Interface Centronics and its applications.
7) To configure the modem of a computer.
8) To make inter-connections in cables for data communication in LAN.
9) To install LAN using Tree topology.
10) To install LAN using STAR topology.
11) To install LAN using Bus topology.
12) To install LAN using Token-Ring topology
13) To install WIN NT
14) To cofigure a HUB/Switch.
NOTE : 1. At least ten experiments have to be performed in the semester; At least seven experiments should be performed from
above list. Remaining three experiments may either be performed from the above list or designed & set by the concerned Department
as per the scope of the syllabus .
ECE-423 EMBEDED SYSTEMSDESIGN LAB
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 HRS
8051 Micro Controller
1. Write an Assembly language Programme (ALP) to generate 10kHz square wave.
2. Write an ALP to generate 10 kHz frequency using interrupts.
3. Write an ALP to interface one Microcontroller with other wring serial/parallel communication.
4. Write an ALP for temperature & pressure measurement & to display on intelligent LCD display
PIC Microcontroller
.
5. Write an ALP for PWM based speed control of motor .
6. Write an ALP for PWM based regulator of voltage.
7. Write an ALP to send/receive the data from an computer to MC through serial communication
General
8. Study of Development tools/environment for Microcontroller Programme.
9. Develop an embedded system for traffic light controller using Micro controller
10. Develop an embedded system for the automatic motion of a car (Model of car) & Subsequent display on LCD using Microcontroller..
ECE-427 DIGITAL SIGNAL PROCESSING LAB
L T P Credits Class Work : 25
- - 2 2 Exam : 25
Total : 50
Duration of Exam : 3 HRS
LIST OF EXPERIMENTS:
Perform the experiments using MATLAB:
1. To represent basic signals (Unit step, unit impulse, ramp, exponential, sine and cosine).
2. To develop program for discrete convolution.
3. To develop program for discrete correlation.
4. To understand stability test.
5. To understand sampling theorem.
6. To design analog filter (low-pass, high pass, band-pass, band-stop).
7. To design digital IIR filters (low-pass, high pass, band-pass, band-stop).
8. To design FIR filters using windows technique.
9. To design a program to compare direct realization values of IIR digital filter
10. To develop a program for computing parallel realization values of IIR digital filter.
11. To develop a program for computing cascade realization values of IIR digital filter
12. To develop a program for computing inverse Z-transform of a rational transfer function.
NOTE: At least ten experiments have to be performed in the semester; out of which at least seven experiments should be performed
from above list. Remaining three experiments may either be performed from the above list or designed & set by the concerned
Department.
ECE-431 PROJECT
B. Tech Semester –VII (Electronics & Communication Engg)
L T P Credits Class Work : 50 Marks
- - 4 4
The primary objective of this course is to develop in students the professional quality of synthesis employing technical
knowledge obtained in the field of Engineering & Technology through a project work involving design, analysis augmented with
creativity, innovation and ingenuity.
Project involving design/ fabrication/ testing/ computer simulation/ case studies etc. which commences in the VII
Semester will be completed in VIII Semester and will be evaluated through a panel of examiners consisting of the following:
Chairman of Department : Chairperson
Project coordinator : Member Secretary
Respective project supervisor : Member
The student will be required to submit two copies of his/her project report to the department for record (one copy each for
the department and participating teacher).
Project coordinator will be assigned the project load of, maximum of 2 hrs. per week including his own guiding load of one
hr. However, the guiding teacher will be assigned maximum of one period of teaching load irrespective of number of students/groups
under him/her.
The format of the cover page and the organization of the body of the report for all the B.Tech. will be finalized and
circulated by the Dean, Faculty of Engineering and Technology.
ECE-435 PROFESSIONAL TRAINING –II
B. Tech Semester –VII (Electronics & Communication Engg)
L T P Credits Class Work : 50 Marks
- - 2 2 Total : 50 Marks
At the end of 6th semester each student would undergo four weeks Professional Training in an Industry/ Institute/ Professional /
Organization/ Research Laboratory etc. with the prior approval of the Training andPlacement Officer of theUniversity and submit
in the department a typed report along with a certificate from the organization.
The typed report should be in a prescribed format.
The report will be evaluated in the VII Semester by a Committee consisting of three teachers fromdifferent specialization to be
constituted by the Chairperson of the department. The basis of evaluation will primarily be the knowledge and exposure of the
student towards different processes and the functioning of the organization.
The student will interact with the committee through presentation to demonstrate his/her learning.
Teachers associated with evaluation work will be assigned 2 periods per week load.
ECE-402 WIRELESS COMMUNICATION
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 Hrs.
UNIT 1. INTRODUCTION TO WIRELESS COMMUNICATION SYSTEMS:
Evolution of mobile radio communications, examples of wireless comm. systems, paging systems, Cordless telephone systems,
comparison of various wireless systems.
UNIT 2. MODERN WIRELESS COMMUNICATION SYSTEMS:
Secondgenerationcellular networks, thirdgenerationwireless networks, wireless inlocal loop, wireless local area networks, Blue tooth
and Personal Area networks.
UNIT 3. INTRODUCTION TO CELLULAR MOBILE SYSTEMS:
Spectrum Allocation, basic Cellular Systems, performance Criteria, Operation of cellular systems, analog cellular systems, digital
Cellular Systems.
UNIT 4. CELLULAR SYSTEM DESIGN FUNDAMENTALS:
Frequency Reuse, channel assignment strategies, handoff Strategies, Interference and system capacity, tracking and grade off service,
improving coverage and capacity.
UNIT 5. MULTIPLE ACCESS TECHNIQUES FOR WIRELESS COMMUNICATION:
Introduction to Multiple Access, FDMA, TDMA, Spread Spectrum multiple Access, space division multiple access, packet ratio, capacity
of a cellular systems.
UNIT 6. WIRELESS NETWORKING:
Difference between wireless and fixed telephone networks, development of wireless networks, fixed network transmission hierarchy,
traffic routing in wireless networks, wireless data services, common channel signaling, ISDN (Integrated Services digital Networks),
advanced intelligent networks.
UNIT 7. INTELLIGENT CELL CONCEPT AND APPLICATION:
Intelligent cell concept, applications of intelligent micro-cell Systems, in-Building Communication, CDMA cellular Radio Networks.
TEXT BOOKS:
1. Wireless Communications: Theodore S. Rappaport; Pearsons.
2. Mobile Cellular Telecommunication: W.C.Y.Lee; McGraw Hill
REFERENCE BOOK:
1. Mobile Communications: Jochen Schiller; Pearson
NOTE: Eight questions are to be set -one question from each unit. Students have to attempt any five question.
ECE-404 SATELLITE COMMUNICATION ENGINEERING
L T P Credits Class Work : 50
3 1 0 4 Exam : 100
Total : 150
Duration of Exam : 3 Hrs
UNIT1. PRINCIPLES OF SATELLITE COMMUNICATION:
Evolution & growth of communication satellite, Synchronous satellite, Satellite frequency allocation & Band spectrum, Advantages of
satellite communication, Active & Passive satellite, Modem & Codec. Applications of satellite communication.
UNIT2. COMMUNICATION SATELLITE LINK DESIGN:
Introduction, General link design equations, Systemnoise temperature, C/N & G/T ratio, Atmospheric & Ionospheric effects on link
design, Complete link design, Earth station parameters.
UNIT3. ANALOG SATELLITE COMMUNICATION :
Introduction, Baseband analog(Voice) signal, FDMtechniques, S/N&C/Nratio in frequencymodulation in satellite link, S/Nratio inFM
with multiplexed telephone signal in satellite link, Single channel per carrier(SCPC) systems, Companded single sideband (CSSB)
systems, Analog FM/FDMTV satellite link, Intermodulation products & their effects in FM/FDMsystems, Energy disposal in FM/FDM
systems.
UNIT4. DIGITAL SATELLITE COMMUNICATION :
Advantages of digital communication, Elements of digital satellite communication systems, Digital baseband signals, Digitalmodulation
techniques, Satellite digital link design, Time Division Multiplexing.
UNIT5. MULTIPLE ACCESS TECHNIQUES: Introduction, TDMA, TDMA-Frame structure, TDMA-Burst structure, TDMA-Frame
efficiency, TDMA-superframe, TDMA-Frame acquisition & Synchronization, TDMA compared to FDMA, TDMA Burst Time Plan,
Multiple Beam ( Satellite switched) TDMA satellite system, Beam Hopping(Transponder Hopping) TDMA, CDMA & hybrid access
techniques.
UNIT6. SATELLITE ORBITS:
Introduction, Synchronous orbit, Orbital parameters, Satellite locationwith respect to earth, Look angles, Earth coverage&slant range,
Eclipse effect, Satellite placement in geostationary orbit, station keeping, Satellite stabilization.
UNIT7. SPECIAL PURPOSE COMMUNICATION SATELLITES :
BDS, INMARSAT, INTELSAT, VSAT(data broadband satellite), MSAT( Mobile Satellite Communication technique), Sarsat( Search &
Rescue satellite) &LEOs (Lower earth orbit satellite), Satellite communicationwith respect to Fiber Optic Communication, LANDSAT,
Defense satellite.
UNIT8. LASER SATELLITE COMMUNICATION:
Introduction, Link analysis, Optical satellite link transmitter, Optical satellite link receiver, Satellite Beam Acquisition, Tracking &
Positioning, Deep Space Optical Communication Link.
TEXT BOOK:
1. Satellite Communication : D.C. Aggarwal ; Khanna.
REFERENCE BOOK :
1. Satellite Communication :Gagliardi ; CBS
NOTE: Eight questions are to be set - one question from each unit. Students have to attempt any five question.
ECE-424 SATELLITE COMMUNICATION LAB
L T P Credits Class Work : 50
- - 2 2 Exam : 50
Total : 100
Duration of Exam : 3 Hrs
LIST OF EXPERIMENTS:
1. To set up a active and passive satellite communication link and study their difference.
2. To measure the base-band analog (voice) signal parameters in the satellite link.
3. To measure C/N ratio.
4. To transmit and receive the function generator waveforms through a Sat.Com. link.
5. To measure the digital baseband signal parameters in Sat.Com. link.
6. To send telecommand and receive the telemetry data.
7. To set a PC to PC Sat. Com. Link using RS-232 ports.
8. To measure the propagation delay of signal in a Sat. Com. Link.
9. To measure fading of a received signal.
10. To measure the parameters in an analog FM/FDM TV Sat.Com. link.
11. To measure the S/N ratio.
12. To calculate the figure of merit and FM deviation.
NOTE: At least ten experiments are to be performed , atleast seven experiments are to be taken fromthe above list and the remaining
three based on the syllabus of ECE-404-C(SatelliteCommunicationEngineering) be developed at the Department level. The students
will be required to perform at least eight experiments in the semester.
ECE- 431 PROJECT
B. Tech Semester –VIII (Electronics & Communication Engg)
L T P Credits Class Work : 50 Marks
- - 8 8 Exam : 100 Marks
Total : 150 Marks
The project started in VII Semester will be completed in VIII Semester and will be evaluated through a panel of examiners consisting
of the following:
Chairperson of Department : Chairperson
Project coordinator : Member
External expert : To be appointed by the University
The student will be required to submit two copies of his/her project report to the department for record (one copy each for the
department and participating teacher).
Project coordinator will be assigned the project load of, maximum of 2 hrs. per week including his own guiding load of one hr.
However, the guiding teacher will be assigned maximum of one period of teaching load irrespective of number of students/groups
under him/her.
The format of the cover page and the organization of the body of the report for all the B.Tech. will be finalized and circulated by the
Dean, Faculty of Engineering and Technology.
ECE-422 SEMINAR
B. Tech Semester –VIII (Electronics & Communication Engg)
L T P Credit Class Work : 50 Marks
- - 2 2 Total : 50 Marks
The objectives of the course remains
To learn how to carryout literature search
To learn the art of technical report writing
To learn the art of verbal communication with the help of modern presentation techniques
A student will select a topic in emerging areas of Engineering & Technology and will carry out the task under the
observation of a teacher assigned by the department.
He/ She will give a seminar talk on the same before a committee constituted by the chairperson the department. The
committee should comprise of three faculty members from different specializations. The teacher associated in the
committee will be assigned 2 hours teaching load per week.
`
However, guiding students’ seminar will not be considered towards teaching load.
The format of the cover page and the organization of the body of the seminar report for all the undergraduate programs will be
finalized and circulated by the Dean, Faculty of Engineering and Technology.
GPEC 402 GENERAL FITNESS FOR THE PROFESSION
B. Tech Semester –VIII (Electronics & Communication Engg)
L T P Credits Exam : 100 Marks
- - - 4
The purpose of this course is to inculcate a sense of professionalismin a student alongwith personality development in terms
of quality such as receiving, responding, temperament, attitude and outlook. The student effortswill be evaluated on the basis
of his/ her performance / achievements in different walks of life.
The evaluation will be made by the committee of examiners constituted as under:
1. Dean, Faculty of Engineering & Technology Chairperson
2. Chairperson of the department Member
3. External expert Appointed by the university
A. The student will present a written report before the committee with following in view:
The student will present before the committee his/her achievements during the current academic session in the
Form of a written report highlighting following:
I. Academic Performance --------
II. Extra Curricular Activities (8 Marks)
III Technical Activities (8 Marks)
IV Industrial, Educational tour (8 Marks)
V Sports/games (8 Marks)
VI Community Service, Hostel Activities (8 Marks)
NOTE: Report submitted by the students should be typed on both sides of the paper.
B. A student will support his/her achievement and verbal & communicative skill through presentation before the examiners.
(40 Marks)
C. Faculty Counselor Assignment (20 Marks)
It will be the duty of the student to get evaluated by respective faculty counselor and to submit the counselor assessment marks in a
sealed envelop to the committee.
A counselor will assess the student which reflects his/her learning graph including followings:
1. Discipline throughout the year
2. Sincerity towards study
3. How quickly the student assimilates professional value system etc.
ECE-406 Mobile Communication
L T P Credits Class Work : 50
4 - 0 4 Exam : 100
Total : 150
Duration of Exam : 3 Hrs
UNIT 1 MOBILE RADIO SYSTEM:
A reference model, Frequencies for radio transnussion, Signals, Antennas, Signal Propagation, Multiplexing. Modulation
UNIT 2 CHARACTERISTICS OF RADIO WAVES:
Multipath Characteristics of radio waves signal fading, time dispersion, Doppler spread, coherence time, LCR. fading statistics. Diversty techniques
UNIT 3 MOBILE RADIO PROPAGATION:
Mechanism, free space path loss, long distance path lossmodel, Okumaramodel, Hatamodel, PCSmodel, widebandPCS,Microcellmodel, Indoor
propagation model, Jake’s channel model.
UNIT 4 WIRELESS SYSTEMS:
Standards –GSM, signaling & call control, mobility management, location racking wireless data services IS-95, GPRS.
UNIT 5 WIRELESS DATA NETWORKING:
IEEE Standards, Models Different layers, wireless LAN, Hypes LAN, Blue tooth. Performance analysis of link & transport layer protocols over
wireless channels.
UNIT 6 MOBILE NETWORK LAYER:
Mobile IP: Goals, assumptions & requirements, IP packet delivery, Agent discovery, Registration, tunneling and en capsulation, optimization,
Reverse tunneling, IP-V6, Mobile ad-hoc networks.
UNIT 7 MOBILE TRANSPORT LAYS:
Tradition TCP, Classical TCP improvement, TCP over 2.5G/3G wireless networks. Performance enhancing proxies.
TEXT BOOKS:
Mobile Communication: II nd edition Jochen Schiller Pearson Education
REFERENCE BOOKS:
1. Mobile Cellular Telecommunications: 2nd Edition: William, C Y Lee Mc Graw Hill
2. Wireless and Digital Communication: Dr. Kamilo Feher (PHI)
3. T.S. Rappaport, “Wireless Communication, Principles & Practice”, PHI 2001.
Note: Eight questions are to be set –at least one from each unit. Students have to attempt five questions.
ECE-408 Digital Signal Processors and Applications
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals : 50
Total : 150
Duration of Exam.: 3 hrs.
1. SDP 56002: Architecture, CPU, ALU, Program Controller, Address Generation Unit, Addressing Modes, Interrupt, Priority register.
2. DSP 56002 Instruction Set: Instruction Formats Parallel move operating parallel move types, instructions set, move arithmetic logic,
bit manipulation, loop, programmed control instructions.
3. Applications: Designing and implementing FIR, IIR filters, implementing Fast Fourier. Transforms with DSP 56002.
4. TMS - 320 Architecture, and Instruction Set, Addressing, Interrupt Structure, Programming.
TEXT BOOK:
1. Mohammed EL. Sharkawy: Digital Signal Processor Applications with Motorola's DSP 56002. PTR.
2. Venkat Ramani, “Digital Signal Processor :Theory, Programming & Applications”, TMH
Note: Eight questions are to be set –at least one from each unit. Students have to attempt five questions.
ECE-410 Telecommunication Switching Systems
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals : 50
Total : 150
Duration of Exam.: 3 hrs.
1. EVOLUTION OF SWITCHING SYSTEM:
What is Switching, Types of Switching, Block Diagram of Telecommunication Network, Switching System Fundamentals,
Classification of Switching System, Elements of a Switching System, Basic Function of Switching System, Basic Telephone
Communication, Function of a Manual Switching System, Magneto or Local Battery Switchboard, Common Battery
Switchboard, Limitations of Manual Switching System, Introduction to strowger switching system.
2. CROSSBAR SWITCHING SYSTEM:
Introduction, Principle of Common Control, Touch Tone Dial Telephone, Crossbar Switch Mechanism, Principle of Crossbar
Switching, Crossbar Switch Configurations, Organisation of a Crossbar Telephone Switch, A General Trunking, Electronic
Switching, Classification Crosspoint Technology
3. SPACE DIVISION SWITCHING:
StoredProgramcontrol, CentralisedSPC, DistributedSPC, SoftwareArchitechture, Application software, EnhancedServices,
Two Stage Networks, n-Stage Networks.
4. TIME DIVISION SWITCHING:
Introduction, Analog Time Division Switching, Digital Time Division Switching, A Digital Memory Switch, Time Stages in
General, Two-Dimensional Switching, Multiple Stage Time and Space Switching
5. PACKET SWITCHING:
Statistical Multiplexing, Local area & wide area networks, Large Scale Networks, Broadband Networks
6. TELETRAFFIC ENGINEERING:
Introduction, Network Traffic Load, CCITT Recommended Busy Hours, Traffic Terminology, The Unit of Traffic, Congestion,
Grade of Service, Blocking Probability, Traffic Measurements, Modelling Switching System, Markov processes representing
traffic. Calculation of blocking probability, stationary probability measures for Ergodic Markov processes. Combinatorial
interpretation, calculation of blocking probability.
7. CONTROL OF SWITCHING SYSTEMS:
Call Processing functions, common control, Reliability, Availability & Security.
8. SIGNALLING:
Customer Line Signalling, Audio frequency junctions & trunk circuits, FDMcarrier Systems, PCMsignalling, Inter – register
signalling, Common channnel Signalling Principles.
Text Books:
1. Thiagarajan Viswanathan, “Telecommunication Switching Systems and Networks”, PHI
2. Syed Riffat Ali, “Digital switching Systems, system reliability and analysis”, Tata MC Graw, 2002.
Reference Books:
1. Keshav S, “An Engineering Approach to Computer Network Networking”, Addison Wesley, 1998.
2. Martin, “Telecommunication & Computer 3e”, PHI
Note: Eight questions are to be set –at least one from each unit. Students have to attempt five questions.
ECE-412 Image Processing
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals : 50
Total : 150
Duration of Exam.: 3 hrs.
1. Introduction: Fundamental steps in Digital Image Processing, Components of an Image Processing system, Digital Image
Fundamentals: Elements of Visual Perception, Light and the electromagnetic spectrum, Image sensing and Acquisition, simple
image formation model.
2. Image sampling and Quantization: concept of sampling & quantization, Representation of digital images, spatial and Graylevel
resolution, Relationships between pixels-neighbors of pixel, Adjacency, connectivity, regions, and boundaries, distance
measures, Image operations on a pixel basis.
3. Image enhancement in Spatial domain: some basic Gray Level Transformations, Image negatives, log transformations,
Power-Law transformations, piecewise –Linear Transformation functions; Histogram Processing, Enhancement using
arithmetic/logic operations, Basics of spatial filtering.
4. Image Enhancement in frequency domain: Introduction to Fourier Transform and frequency domain, Two dimensional DFT
and its inverse, Filtering in the frequency domain, correspondence between filtering in the spatial and frequency domains;
Smoothing frequency domain filters: Ideal lowpass filters, butterworth lowpass filters, Gaussian lowpass filters; sharpening
frequency domain filters(Ideal, butterworth & Gaussian highpass filters) Homomorphic filtering, Implementation: properties of
2-D Fourier Transform, Computation of inverse Fourier Treansform using forward Transform algorithm, Fast Fourier
Transform.
5. Image Restoration: A model of the image degradation/ restoration process, Noise models: Spatial and frequency properties
of noise, Periodic noise, Estimation of noise parameters, Restoration in the presence of noise only spatial filtering: Mean
Filters, Order statistics Filters, Adaptive filters; Periodic noise reduction by frequency domain filtering, Estimating the
Degradation Function, Inverse Filtering. Minimum Mean Square Error (Wiener) filtering
6. Image Compression: Fundamentals, Image Compression Models: The source encoder and decoder, the channel encoder
and decoder, elements of information theory: Measuring information, The information channel, Fundamental coding theorems;
error free compression, lossy compression.
7. Image Segmentation: Detection of Discontinuities: Point detection, Line Detection, Edge detection; Edge Linking and
Boundary detection, Thresholding: Role of Illumination, basic global thresholding, basic adaptive thresholding, Regional based
segmentation: Basic Formulation, Region growing, region splitting and merging; use of motion in segmentation: Spatial
Techniques, Frequency Domain Techniques
.
Text Books:
1. Rafael C. Gonzalez and Richard E. Woods, “Digital Image Processing”, Pearson
2. Anil K Jain, “Fundamentals of Digital Image Processing”, PHI Edition 1997.
Reference Books:
1. Keenneth R Castleman, " Digital Image Processing”, Pearson
2. Chanda & Majumder, “Digital Image Processing & Analysis”, PHI
NOTE: 1 In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be required to
attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular phone etc. will not be
allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner of answer books.
ECE-414 Radar and Sonar Engineering
L T P Credits Marks
4 - 0 4 Class Work : 50
Exam : 100
Total : 150
Duration of Exam : 3 Hrs
UNIT 1. INTRODUCTION TO RADAR:
Radar Block Diagram & operation, Radar Frequencies, Radar development, Application of Radar.
UNIT 2. RADAR EQUATION:
Simple form of Radar Equation, Prediction of Range performance, Minimum detectable signal, Receiver noise, Signal to Noise ratio,
Transmitter Power, Pulse repetition frequency & range ambiguities, System losses, Propagation effects.
UNIT 3. CW & FREQUENCY MODULATED RADAR:
The Doppler effect, CW Radar, Frequency-modulated CW Radar, Multiple Frequency CW Radar.
UNIT 4. MTI & PULSE DOPPLER RADAR:
Introduction, Delay Line Cancellors, Multiple or staggered, Pulse repetition frequencies, range-Gated Doppler Filters, Digital Signal
Processing, Other MTI delay line, Limitation of MTI performance, Noncoherent MTI, Pulse Doppler Radar, MTI from a moving platform.
UNIT 5. TRACKING RADAR:
Tracking with Radar, Sequential Lobbing, Conical Scan, Monopulse Tracking Radar, Tracking in range, Acquisition.
UNIT 6. RECEIVERS, DISPLAYS & DUPLEXERS:
Radar Receivers, Noise Figure, Mixer, Low-noise Front ends, Displays, Duplexer, Receiver protectors.
UNIT 7. INTRODUCTION TO SONAR
TEXT BOOK:
1. Introduction to Radar Systems: Merrill I. Skolnik, ; MGH
REFERENCE BOOK:
1. Electronic Communication Systems : Kennedy; TMH
NOTE: 8 questions are to be set –at least one from each unit. Students have to attempt any five Questions.
ECE-416 RELIABILITY ENGINEERING
L T P Credits Marks
4 - - 4 Exams: 100
Sessionals : 50
Total : 150
Duration of Exam.: 3 hrs.
1. Introduction: Definition for Reliability, Need for reliability engineering, Causes of failures, catastrophic failures and
degradation failures. Characteristic types of failures, useful life of components, Exponential case of chance failures, Reliability
measures, Derivation for exponential distribution function, other kinds pf distributions, Binomial, Poisson uniform, Rayleigh,
Weibull, Gamma distributions, Markov chains, failures data analysis.
2. Reliability in Systems: Reliability Block Diagrams, series systems, parallel systems, K-out of - M systems, Open and short
circuit failures, standby systems. Reliability Analysis of Non-series Parallel system, Boolean Algebra Method, Cut-set
approach, delta star method, logical signal relation method, Bayes Theorem Method
3. Reliability Prediction: Objective of reliability Prediction, Classification, information sources for failure rate data, prediction
methodologies, general requirement, role and limitations of reliability prediction.
4. Reliability Allocation: Subsystems reliability improvement, Apportionment for new units, criticality.
5. Redundancy Techniques for reliability: Forms of maintenance, measures of maintainability and availability, maintainability
function, availability function, two unit parallel system with repair, Markov model for two unit systems, preventive maintenance,
provisioning of spares.
6. Reliability Testing: Kinds of testing, component reliability measurements parametric methods, confidence limits, accelerate
testing, equipment acceptance testing.
7. Economics of Reliability Engineering: Reliability cost, effect of reliability on cost. Reliability achievement cost models,
reliability utility cost models, replacement policies.
8. Integrated performance measures for communication systems: Integration of reliability and capacity, Delay related
reliability.
Text Books:
1. KK Aggarwal, “Reliability Engineering”, Kluwer Academic Netherlands.
2. B Singh, “Quality Control and Reliability Analysis”, Khanna Publishers.
Reference Books
1. KB Mishra: Reliability Prediction & Analysis: A Methodology oriented treatment ,Elseveir,Netherlands
2. Ebeling, “Introduction to Reliability & Maintainability”, TMH
NOTE: 1 In the semester exam., the examiner will set 8 questions in all covering the entire syllabus. Students will be required to
attempt any five questions.
2. Use of scientific calculator will be allowed in the exam. However, Pager, Programmable Calculator & Cellular phone etc. will not be
allowed.
3. The scheme of awarding the grades to a student in the course will be supplied by the University to the examiner of answer books.
ECE-418 TELEVISION ENGINEERING
L T P Credits Class Work : 50 Marks
3 1 - 4 Theory : 100 Marks
Total : 150 Marks
Duration of Exam. : 3 Hrs.
UNIT1 ELEMENTS OF A TELEVISION SYSTEM :
Picture transmission, sound transmission, picture reception, sound reception synchronization, receiver controls, color television.
Analysis and Synthesis of Television Pictures: Gross structure, image continuity, no. of scanning lines, flicker, fine structure, tonal
gradation.
UNIT2. COMPOSITE VIDEO SIGNAL :
Video signal dimensions, horizontal sync details, vertical sync details, scanning sequence details, functions of vertical pulse train, sync
details of 525 line system.
UNIT3. SIGNAL TRANSMISSION AND CHANNEL BANDWIDTH :
Amplitude Modulation, channel bandwidth, vestigial side band transmission, Transmission efficiency, complete channel bandwidth,
reception of vestigial side band signals, frequency modulation, FM channel bandwidth, channel bandwidth for color transmission,
allocation of frequency bands for television signal transmission, television standards.
UNIT4. THE PICTURE TUBE :
Monochrome picture tube, Beam deflection, screen phosphor, face plate, picture tube characteristics, picture tube circuit controls.
Television Camera Tubes: Basic principal, Image orthicon, Videocon.
UNIT5. BASIC TELEVISION BROADCASTING:
Television transmitter, positive & negative modulation.
Television Receiver: Receiver sections, vestigial side band correction, choice of intermediate frequencies, picture tube circuitry &
controls, sound signal separation, sound section, Sync processing & AFC circuit, vertical Deflection circuit, Horizontal deflection circuit.
Television Signal propagation & Antennas: Television Transmission antennas , television receiver antennas, color television antennas.
UNIT6. ESSENTIALS OF COLOR TELEVISION:
Compatibility, natural light, color perception, three color television camera, the luminance signal, values of Luminance & color
difference signals on Colors, color television display tubes (Delta gun, PIL, Trinitron).
UNIT7. COLOR SIGNAL TRANSMISSION AND RECEPTION :
Color signal transmission, bandwidth for color signal transmission.
UNIT8. TELEVISION APPLICATIONS:
Cable television, CCTV, picture phone&fascimile, television via satellite, RemoteControl ( Electronic control system), Introduction to
Digital TV Technology and their merits , HDTV.
TEXT BOOK:
Monochrome and Color Television : R.R.Gulati ; New Age.
REFERENCE BOOK :
TV and Video Engineering : Dhake ; TMH.
NOTE: Eight questions are to be set –one from each unit. Students have to attempt five questions.
